By Bill Adkins

When the need for a tool on the fireground arises, we usually do not have the time to go looking for it. Better yet, we need to make sure it is there in the first place. This all starts with performing accurate truck checks. Ask yourself, “Does your rig have everything on it that it’s supposed to have?”

This article will go over some techniques and options to organize and streamline your truck checks so you can quickly identify any missing equipment.

The Human Aspect of Truck Checks

An accurate truck check is an important way to identify whether or not you have the equipment your apparatus is required to have. Your members took the time to decide what equipment was needed for your apparatus; we need to do our due diligence to make sure it stays that way.

Over the years, I’ve found that the harder or longer it takes to complete truck checks, the more I have found firefighters “pencil whipping” them. What can we do as a department to prevent this from happening? Is discipline always the answer? I believe it is not. We can assist them from ever needing to pencil whip the truck checks by organizing our apparatus so one can tell right away if something is missing. A firefighter is more likely to complete an accurate truck check if it only takes a few minutes to identify that something is missing.

It’s extremely nice to open a compartment door and, with a quick glance, can tell if

According to a report from CBC, the Summerside Fire Department (SFD), located on Prince Edward Island, Canada, unveiled its new pumper truck.

The department marked its arrival with a centuries-old tradition North American fire service tradition new to the city: SFD firefighters gathered to push the truck into its new home, a tradition that dates back to the early 1800s, when departments would pull steam engines or the hand pumpers with horses, and the horses were unable to back them into the station.

SFD Ron Enman noted that its been done across North America since that time, and he thought it would be something they’d start doing in Summerside.

The new pumper replaces a 25-year-old apparatus that was near the end of its life span. Enman said the pumper is the same model as the other two pumpers at the station, so current SFD firefighters would not need much training on it.

The new SFD pumper cost $681,000.

The post Summerside (PEI, Canada) Celebrates Latest Apparatus with Old “New” Tradition appeared first on Fire Apparatus.

According to a report from The Gainesville Times, Hall County (GA) Fire Services (HCFS) have replace roughly half of its fleet of trucks with nine new vehicles, while construction and planning for the HCFS’s two new fire stations continues.

The HCFS began training on the new vehicles, which included eight trucks and one ladder truck, on January 26. The department hopes to have the new engines on the road by early February, said HCFS Chief Chris Armstrong.

Hall County spokeswoman Katie Crumley said the aerial truck, worth $1.1 million, was paid for by funds in SPLOST VII, while the engines were purchased with SPLOST VIII funds. Each engine is worth $740,300.

With the HCFS running 19 rigs daily, this move replaces nearly half the department’s fleet. Armstrong said there was not a set timeline for when the remaining fleet would need to be replaced.

Some vehicles in HCFS’s fleet were nearing 15-20 years on the road, which Armstrong said was beyond their normal life cycle. Of these trucks, Armstrong said the department may keep one for the training division; the department also needs a reserve fleet in case they have issues with another engine.

Armstrong also said that the aerial ladder truck is for the upcoming Station No. 17. In the meantime, construction has since begun on Station No. 1, with Armstrong predicting that it will be open and in use in October. The county broke ground for the station on November 17.

The post Hall County (GA) Fire Services Replaces Half its Fleet, Readies New Stations appeared first on Fire Apparatus.

According to a report from Greenville Sun, Tusculum, Tennessee, Mayor Alan Corley informed city’s Board of Mayor & Commissioners that a new Tusculum Volunteer Fire Department (TVFD) station could be built as early as this year.

In addition, commissioners also approved a resolution for Tusculum to apply for a Tennessee Small Cities Community Development Block Grant, which would be spent on purchasing a new ladder/pumper truck for the fire department.

Corley’s decision was based on the town’s local and state sales tax revenues exceeding projections.

Last year, the board approved rezoning a tract of land next to a multipurpose building on Alexander Street as the future site for a TVFD station. The multipurpose building currently houses fire apparatus, Department of Public Works vehicles, and other equipment.

Corley said an all-metal building similar to the Caney Branch (TN) Volunteer Fire Department’s station that was built in 2015 would feature several bays and a small kitchen area. Corley estimated the cost of the station to be between $350,000 and $500,000.

According to TVFD Chief Marty Shelton, the department also seeks to replace a 25-year-old truck that is nearing the end of its service life. The department will begin looking for a used truck in good condition that matches the city’s needs.

The post New Fire Station, Truck Grant for Tusculum (TN) in Early Stages appeared first on Fire Apparatus.