Menu

Welcome

The Finest Supporting the Bravest!

The purpose of the Fire Mechanics Section is to promote standardization of fire apparatus and equipment preventative maintenance, improve safety standards and practices, promote workshops, conferences, and seminars related to the purposes of this Section, and to promote cost savings through standardization of building and equipment purchasing and maintenance.

RECENT FIRE MECHANIC NEWS

Posted: Feb 1, 2019

From Small to Large, Command Vehicles Are Central Hubs for Complex Emergency Incidents


Command vehicles often become the hub of activity at large incident scenes because of the communication, control, and monitoring functions built into them. The various styles of command vehicles used by fire departments range from large RV-sized vehicles and trailers to small command areas built into the back of SUVs and pickup trucks.

MEDIUM SIZE

Joe Messmer, president of Summit Fire Apparatus, says that while large command vehicles and trailers continue to be supplied to departments that have regional responsibilities, many recent command units Summit has done are on smaller medium-duty chassis, both commercial and custom. “On that size command vehicle, we’ll put on a standard 20-foot-long box that’s wide open on the inside and then set up the partitions as the department requests,” Messmer says. “We’ve even outfitted extended cab rescue-pumpers with modified slide-out tables, desks, and cabinetry to allow a command post to be set up, especially when the users need to get out of the weather. Some departments get started at an incident with a unit like that and then hand command duties off to a large command post when it arrives later on the scene.”

E-ONE built this command truck for the Sarasota (FL) Fire Department on a Freightliner 114 D chassis with a 22-foot body. (Photos 1-5 courtesy of E-ONE.)

1 E-ONE built this command truck for the Sarasota (FL) Fire Department on a Freightliner 114 D chassis with a 22-foot body. (Photos 1-5 courtesy of E-ONE.)

Virginia Beach (VA) Fire Rescue had E-ONE build a battalion command vehicle on a Ford F-550 four-door chassis with a slide-out tray at the rear holding all the command and control equipment.

2 Virginia Beach (VA) Fire Rescue had E-ONE build a battalion command vehicle on a Ford F-550 four-door chassis with a slide-out tray at the rear holding all the command and control equipment.

This is the interior layout of a command truck that E-ONE built for Tshwane, South Africa.

3 This is the interior layout of a command truck that E-ONE built for Tshwane, South Africa.

Aramco Saudi Arabia had E-ONE build this command truck on a custom chassis. Note the multiple access doors on the curb side.

Read more
Posted: Feb 1, 2019

From Small to Large, Command Vehicles Are Central Hubs for Complex Emergency Incidents


Command vehicles often become the hub of activity at large incident scenes because of the communication, control, and monitoring functions built into them. The various styles of command vehicles used by fire departments range from large RV-sized vehicles and trailers to small command areas built into the back of SUVs and pickup trucks.

MEDIUM SIZE

Joe Messmer, president of Summit Fire Apparatus, says that while large command vehicles and trailers continue to be supplied to departments that have regional responsibilities, many recent command units Summit has done are on smaller medium-duty chassis, both commercial and custom. “On that size command vehicle, we’ll put on a standard 20-foot-long box that’s wide open on the inside and then set up the partitions as the department requests,” Messmer says. “We’ve even outfitted extended cab rescue-pumpers with modified slide-out tables, desks, and cabinetry to allow a command post to be set up, especially when the users need to get out of the weather. Some departments get started at an incident with a unit like that and then hand command duties off to a large command post when it arrives later on the scene.”

E-ONE built this command truck for the Sarasota (FL) Fire Department on a Freightliner 114 D chassis with a 22-foot body. (Photos 1-5 courtesy of E-ONE.)

1 E-ONE built this command truck for the Sarasota (FL) Fire Department on a Freightliner 114 D chassis with a 22-foot body. (Photos 1-5 courtesy of E-ONE.)

Virginia Beach (VA) Fire Rescue had E-ONE build a battalion command vehicle on a Ford F-550 four-door chassis with a slide-out tray at the rear holding all the command and control equipment.

2 Virginia Beach (VA) Fire Rescue had E-ONE build a battalion command vehicle on a Ford F-550 four-door chassis with a slide-out tray at the rear holding all the command and control equipment.

This is the interior layout of a command truck that E-ONE built for Tshwane, South Africa.

3 This is the interior layout of a command truck that E-ONE built for Tshwane, South Africa.

Aramco Saudi Arabia had E-ONE build this command truck on a custom chassis. Note the multiple access doors on the curb side.

Read more
Posted: Feb 1, 2019

Booster Lines on Today’s Fire Apparatus

I thought this topic had run its course in the fire service—other than a rural application or when dealing with an urban interface area where the use of these reels is in a more specifically designed apparatus to meet the challenges of these quick-moving wildfires.

CLEAR DIRECTION

But, they have certainly been making somewhat of a comeback on urban and suburban engine companies as of late. These reels are a pricey option for your apparatus and can take up valuable space on any engine company. So, the department should have a defined need and purpose for using this space and the cost.

Another concern would be a defined operating procedure for the department on what type of fire these booster lines can be deployed and operated at. Their low flow can create some problems on fires where they may have been used in the past. The fuel loads and fuel composition that are ever present in our world today can easily overwhelm this line. The volatility of automobile construction is also another area where the technology and materials have overtaken and will easily overpower the booster line. Be careful when adding the booster line to your apparatus without clear direction on its use in the field.

REEL/LINE SIZE

The booster reel can come in a variety of sizes depending on the space available on a department’s apparatus, and this just refers to the reel size. The size of the hose that is placed on the reel also has a number of options. This size line would be determined by the department’s defined use and the exact water flow it is looking for on the fire it is designed to extinguish. The appropriate nozzle on the end of this line will also need to be considered to ensure it matches the flow requirements for the line.

One of the most common uses for the booster line is to quickly deploy a line on brush fires or small outside fires. This allows for a small maneuverable line that can deliver the desired water flow and then be stored back with minimal effort on the part of the firefighters, with the rewind motor doing most of the work. For the urban engine application, it can handle the quick nuisance fires that many of these companies respond to, such as trash fires and small vegetation fires, and allows for a quicker in-service time for those busy companies.

Any department will need to weigh the operational need of the booster line, the cost, and the space requirements on its apparatus. The choice to add this option is based on the department’s call types and needs for this specific type of line. Although I see the benefits of the booster line and the need by certain departments and their geographic response areas, make sure you are using the booster line for what it is designed for and not using the line out of a matter of convenience or complacency.


RICKY RILEY is the president of Traditions Training, LLC. He previously served as the operations chief for Clearwater (FL) Fire & Rescue and as a firefighter for Fairfax County (VA) Fire & Rescue. He is a firefighter with the Kentland (MD) Volunteer Fire Department. He is a member of the Fire Apparatus & Emergency Equipment Editorial Advisory Board.

Read more
Posted: Feb 1, 2019

Booster Lines on Today’s Fire Apparatus

I thought this topic had run its course in the fire service—other than a rural application or when dealing with an urban interface area where the use of these reels is in a more specifically designed apparatus to meet the challenges of these quick-moving wildfires.

CLEAR DIRECTION

But, they have certainly been making somewhat of a comeback on urban and suburban engine companies as of late. These reels are a pricey option for your apparatus and can take up valuable space on any engine company. So, the department should have a defined need and purpose for using this space and the cost.

Another concern would be a defined operating procedure for the department on what type of fire these booster lines can be deployed and operated at. Their low flow can create some problems on fires where they may have been used in the past. The fuel loads and fuel composition that are ever present in our world today can easily overwhelm this line. The volatility of automobile construction is also another area where the technology and materials have overtaken and will easily overpower the booster line. Be careful when adding the booster line to your apparatus without clear direction on its use in the field.

REEL/LINE SIZE

The booster reel can come in a variety of sizes depending on the space available on a department’s apparatus, and this just refers to the reel size. The size of the hose that is placed on the reel also has a number of options. This size line would be determined by the department’s defined use and the exact water flow it is looking for on the fire it is designed to extinguish. The appropriate nozzle on the end of this line will also need to be considered to ensure it matches the flow requirements for the line.

One of the most common uses for the booster line is to quickly deploy a line on brush fires or small outside fires. This allows for a small maneuverable line that can deliver the desired water flow and then be stored back with minimal effort on the part of the firefighters, with the rewind motor doing most of the work. For the urban engine application, it can handle the quick nuisance fires that many of these companies respond to, such as trash fires and small vegetation fires, and allows for a quicker in-service time for those busy companies.

Any department will need to weigh the operational need of the booster line, the cost, and the space requirements on its apparatus. The choice to add this option is based on the department’s call types and needs for this specific type of line. Although I see the benefits of the booster line and the need by certain departments and their geographic response areas, make sure you are using the booster line for what it is designed for and not using the line out of a matter of convenience or complacency.


RICKY RILEY is the president of Traditions Training, LLC. He previously served as the operations chief for Clearwater (FL) Fire & Rescue and as a firefighter for Fairfax County (VA) Fire & Rescue. He is a firefighter with the Kentland (MD) Volunteer Fire Department. He is a member of the Fire Apparatus & Emergency Equipment Editorial Advisory Board.

Read more
RSS
First22642265226622672269227122722273Last

Theme picker

Upcoming Events

Theme picker

Sponsors

Fire Mechanics Section Board

Chair

Posted: Oct 21, 2015

Chair

Elliot Courage
North Whatcom Fire & Rescue
Read more

Vice Chair

Posted: Oct 21, 2015

Vice Chair

Mike Smith 
Pierce County Fire District #5
Read more

Secretary

Posted: Oct 21, 2015

Secretary

Greg Bach
South Snohomish County Fire & Rescue
Read more

Director #1

Posted: Oct 21, 2015

Director #1

Doug Jones
South Kitsap Fire & Rescue
Read more

Director #2

Posted: Oct 21, 2015

Director #2

Paul Spencer 
Fire Fleet Maintenance LLC
Read more

Director #3

Posted: Oct 21, 2015

Director #3

Jim Morris
Mountain View Fire Department
Read more

Director #4

Posted: Oct 21, 2015

Director #4

Arnie Kuchta

Clark County Fire District 6

Read more

Director #6

Posted: Oct 21, 2015

Director #6

Brett Annear
Kitsap County Fire District 18
Read more

Director #5

Posted: Oct 21, 2015

Director #5

Jay Jacks
Camano Island Fire & Rescue
Read more

Legislative Representative

Posted: Oct 21, 2015

Legislative Representative

TBD
TBD
Read more

Immediate Past Chair

Posted: Oct 20, 2015

Immediate Past Chair

Brian Fortner
Graham Fire & Rescue

Read more
RSS

Theme picker

2020 CAR SHOW