Accurate information is not only important on the fire ground and the pre-hospital setting; it is paramount to the timely and safe repair of fire department vehicles. For that reason it is important to discuss this topic in detail explaining some of the common issues fire department mechanics face. The security of our careers as mechanics in the fire service relies on the ability to provide confident repairs that follow the manufacturer specification.  With so much riding on our work, we must be able to access the information we seek in a timely manner...

Alan M. Petrillo

The Bakersfield (CA) Fire Department covers a wide swath of territory within the Bakersfield, California, city limits-144 square miles with a population of more than 347,000 people-with 180 firefighters working 14 pumpers, three ladder trucks, and a variety of other apparatus out of 14 stations. So, fleet uniformity is an important consideration to Bakersfield's officers and firefighters when specing out new apparatus.

Early in 2012, the department pulled out its pumper specifications and sought input from a number of sources-firefighters, mechanics, and officers-about the good and not-so-good working features of its current apparatus to prepare for a new engine purchase.

Ross Kelly, Bakersfield's deputy chief, says uniformity with the department's existing fleet of pumpers was a concern voiced often. "We took ideas from the pumpers currently in our fleet and looked to improve on some things that weren't working well but still stay in a configuration that we are used to dealing with," Kelly said. "We wanted to keep the body and setup of the equipment on the new pumper as uniform as we could compared with the other pumpers in our fleet."

(1) Uniformity with its other fleet pumpers was a chief concern at the Bakersfield (CA) Fire Department. The KME Severe Service pumper it chose has a Waterous 1,500-gpm pump, 750-gallon water tank, and 20-gallon foam cell. It also features a six-person XMFD cab extended to 59½ inches long to give the crew more space for both structural and wildland firefighting gear. (Photos courtesy of KME.)

Kelly says the department also considered the geography of the coverage area of the station where the new apparatus would be housed in choosing its new pumper. "The station where it was going is mostly hilly in the first-in response areas, so we were looking at strong braking power as well as the angles of approach and departure on the new vehicle," he points out.

Kelly says the input received from department members was included in the specs, which they sent out for bid. Five fire apparatus manufacturers responded to the department's request for bids, and the department chose KME to build the new pumper.

"The finished pumper has some things in different places than our other pumpers, but there was no compromising the basic setup, so it's very similar to our other apparatus," Kelly points out.

(2) The new pumper's hosebed carries 1,700 feet of 2½-inch hose, 600 feet of four-inch LDH, and 300 feet of 1¾-inch hose, all under a hard top cover.

Standard Design

Dean Carriger, the KME salesman who submitted the winning bid, says the Bakersfield pumper is built on a Severe Service chassis, a model KME developed about eight years ago for the Los Angeles County (CA) Fire Department. "The Severe Service line became so popular that it's our premier seller on the West Coast," Carriger says. "It's noted for its durability, unobstructed vision, and having the biggest air-conditioning system available in the fire service. It's all aluminum, including the cab and frame rails, so the design makes for a minimum amount of maintenance."

The XMFD cab that Bakersfield chose is extended to 59½ inches, which Carriger notes "gives the firefighters in the crew cab section more room for their turnout and wildlan

Chris Mc Loone

On a trip to KME's headquarters in Nesquehoning, Pennsylvania, John Kovatch III agreed to sit down and answer a few questions about KME and the fire industry in general. I also sat down with Phil Gerace, director of sales and marketing, who guided me through the history of the company from the time John Kovatch Jr. came back from army service and started a small auto repair shop, which has grown into the KME we know today. In 1946, Kovatch Jr. started the service center and over time bought car dealerships, which grew into a company that remanufactured and eventually built a wide range of specialty vehicles. Over time, Kovatch Jr. bought two car dealerships, a company that built refuelers, and a tank company.

Known for its fire apparatus, which makes up most of its business today, KME also builds refueling trucks for the military and tankers for oil home delivery trucks and is very involved in green energy initiatives.

Among recent highlights, according to Gerace, is KME's certification to ISO:9001. It was a process the company is very proud of, and which led me to ask the "bonus question" below, "What's next for KME?"

CM: Talk about KME's newest offering.

JK: KME has a very broad product line, and we're constantly innovating configurations, cabs, and body options. However, one of the biggest projects we've been successful with is the updating of our AerialCat™ models. We recently completed our 79- to 123-foot rear-mount ladders. In the redesign, we added strength to what were already the strongest devices in the fire service, removed weight, and engineered in a fire service best rating in six performance categories. Now we're doing similar work on the rear-mount platforms.

CM: KME has several large orders right now, with two of the most recent being Boston and the FDNY. What about KME's portfolio has helped it secure these orders?

JK: Many of KME's successes, whether with a small or large department, have been the result of our continued reinvestments during even tough economic times. We've continued to invest in our facility, employees, distribution network, product testing, and quality systems.

CM: What do you think is the most important innovation in the fire service during the past five years?

JK: One of the most important has been the heavy emphasis on fire cab strength and safety options to protect the occupants. Crash testing, roof strength testing, rollover protection, and frontal impact protection are many of the areas where we've seen a tremendous jump in safety for the firefighter. KME is also now offering numerous new safety options regarding pump panels, ladder storage, and hosebeds as well.

CM: What current issues in the fire service trouble you the most?

JK: One of the most troubling is the underfunding of the fire service. Funding for the United States Fire Administration and the Fire Act grants is critical in helping our first responders be ready for the wide range of scenarios for which they're called on a daily basis.

CM: What keeps you up at night?

JK: My two-year-old grandson, John V, when he spends the weekend! Seriously, the kinds of things that keep every business owner up at night: how to balance rising taxes and costs, continue to offer competitive wages and benefits for our employees, and still provide high-quality products and service every day.

CM: What's next for KME?

JK: KME will continue to grow because we've embraced a continual improvement process. We'll expand on the products we offer within our core markets, grow our customer base both domestically and internationally, and continue to grow our already expanded customer service division to provide a fu

By Raul A. Angulo

My favorite tool is the pickhead ax not only because it can cause major damage but because, along with the fire helmet, it's the most recognized iconic symbol of our profession. However, after 35 years on the job, whether I'm on an engine or a ladder company, if I had to choose between grabbing the ax or a D-handle pike pole, I'd choose the pike pole. I'm not saying this is the only tool we need, but I am saying if you're on an engine or a truck, someone on your crew should have a pike pole as part of the tool complement they're carrying in and here's the reason: In addition to the hoseline and the thermal imaging camera, the crew usually carries the irons (a halligan tool and a flathead ax), an A tool, or a pickhead ax. All these tools are fine and may even be necessary, but after forcible entry is made, they lack the reach that's provided by the pike pole. Once your crew is inside the structure, there are numerous scenarios that require extra reach that are difficult to accomplish with regular forcible entry tools.

(1) During a vertical ventilation operation, it is essential that the team has a pike pole of sufficient reach to punch through the ceiling below. Even during this drill on an acquired structure, the pike pole is too short to punch through the ceiling. Notice how the firefighter's face and torso are directly over the vent hole. His entire arm is reaching through the attic space to reach the ceiling. This is a very dangerous position. When hot fire gases and smoke flash during vertical ventilation, it happens with lightning speed. There would be no time for this firefighter to react. He would be engulfed in smoke, heat, and flame. Having a 12-foot pike pole would allow the firefighter to stand windward, away from the vent hole, and still accomplish the objective. (Photos by author.)

The pike pole is a simple design-it's just a pointed hook at the end of a stick-but it's uniquely versatile for the many tasks crews may have to perform on the fireground. Let's look at the general sequence of some realistic fire attack scenarios where the pike pole is invaluable. All references will imply using a D-handle pike pole.

Forcible Entry

First is access and forcible entry. Say you come across any variety of wooden fences. A pike pole can easily pull slats from the stringers or maybe even pull down an entire section of fence. I've done it. The D-handle can also be used to punch the slats away from the horizontal cross members, creating a passageway through the fence.

(2) Leader-North America's telescopic pike pole weighs six and a half pounds. Retracted, it measures seven feet, two inches. Fully extended, it measures 12 feet, three inches. It has a carbon steel head and insulates up to 20,000 volts of electricity, a comforting safety feature. The black center easy-twist mechanism locks the pike pole at the desired length.

A pike pole can be used to help pry and lift up a garage door or a roll-up door. It can also be used to wedge such a door in the up position, preventing it from accidentally closing on the entry team or compressing the charged hoseline. This situation has trapped and killed more than one firefighter. Once the door is opened and the hook is in place, consider placing a vise grip onto the track rail or even replace your hook with a small A-frame ladder to hold the door open so you still have your tool for firefighting activities. Consider the height adva