Alan M. Petrillo

The Bryn Mawr (PA) Fire Company was on schedule to replace two pieces of apparatus -a pumper and a rescue-pumper-as part of its eight-year replacement plan, and its truck committee wanted to be sure to include as much firefighter safety protection on the apparatus as possible.

Chief Dan Kincade convened a 12-person committee consisting of all current company chiefs, three engineers, several past chiefs, and a board of directors member. Kincade says the committee took its current apparatus specs and decided what it wanted to keep and what to delete and then rewrote the specs for both the rescue-pumper, which the company calls a squad, and the pumper.

"We also visited some area fire companies that had newer apparatus," Kincade says, to get an idea of innovations that were available. "We put together our bid specs and got five bids back, although two of the bidders didn't meet our specs," he adds. The committee's unanimous vote was to go with E-ONE for both vehicles, he says.

Safety Features

1 The Bryn Mawr (PA) Fire Company received the first E-ONE rescue-pumper built entirely with E-ONE's ProTech safety protection package. Bryn Mawr designated the vehicle Squad 23. [Photos courtesy of the Bryn Mawr (PA) Fire Company.]

Ron Elmo, owner of First Choice Fire Apparatus, has sold Bryn Mawr a number of pumpers and rescue-pumpers over the years. "The fire company was looking for ways to enhance safety for its firefighters, so we introduced it to the ProTech products that E-ONE has available," he says. "The committee liked them and got approval to add them to the specs before the preconstruction conference."

Joe Hedges, product manager for aerials and chassis at E-ONE, says both of the Bryn Mawr vehicles were being built with all of the elements of E-ONE's ProTech system with the exception of OnGuard, added later, which is a forward-looking radar system that was just coming online for E-ONE's chassis.

2 The front of the Bryn Mawr rescue-pumper mounts the forward-looking infrared radar (FLIR) system that drives the OnGuard system in the center of the bumper. The extended bumper also carries a Holmatro combination tool, with CORETM Technology, and 60 feet of hydraulic hose on a reel.

ProTech is a comprehensive safety package for all E-ONE's chassis that includes a roll cage cab that can withstand twice the National Fire Protection Association and Society of Automotive Engineers impact requirements and five times the roof load requirements; front and side air bag systems with integrated seat belt pretensioners; electronic stability control, which constantly monitors driving conditions; an occupant detection system that gives audible and visual warnings; backup sensors that warn a driver of p

By Raul A. Angulo

The N gates have a long set of stairs that go up to the main terminal. Thank goodness for escalators. Even climbing the stairs on the escalator is a workout. I always choose to ride it up. As I was gliding up the escalator, I thought, "Too bad Ladder 6 doesn't have an escalator instead of a ladder. That would make ladder rescues fast and easy!" Alan Petrillo wrote "Alternative Lift Systems Proposed for Rescue Aerials" in the September 2011 issue of Fire Apparatus & Emergency Equipment. Inventor Orville Douglas Denison started studying fire-rescue technology after the extensive television coverage of the September 11th attack on the World Trade Center.

1 The SpineBoard is a wedge-shaped backboard that uses conveyor-belt technology to smoothly and effortlessly load a patient safely onto the backboard. The upper board and lower carriage are attached. The wedge automatically keeps the patient in a semi "shock position." This has its advantages for hypotensive patients. (Photos by author.)

Denison came up with a rescue conveyor ladder design that was actually an "escalator for firefighters." It was a 113-foot aerial ladder with a conveyor system of rungs that could operate at 200 feet per minute, carrying a firefighter up to the tip in about 30 seconds. He also claimed his ladder could rescue four victims and have them down in four minutes. Although this conveyor-belt technology has not been implemented on fire apparatus yet, a company serving the emergency medical services (EMS) market is adapting it.

EMS is about 80 percent of our emergency work. Patient packaging and transport are the most time-consuming and physically demanding parts of it, so I'm always looking for something that is quicker, easier, and safer to accomplish this task. On the average, the fire service sustains approximately 100,000 on-duty injuries per year. Of those, my guess is that 50 percent of them are back injuries from heavy lifting and twisting.

2 Once the patient is loaded on to the SpineBoard, connect the the side rails and head rail. They slide on very easily.

In 1999, John Spanton was watching his son play high school football. Over the seasons he witnessed numerous sports injuries on the field. He watched from the stands time and time again as local emergency medical technicians (EMTs) responded with aid kits, backboard, and gurney to tend to an injured player. Knowing something about emergency medicine, Spanton knew it was paramount to immobilize the neck and keep the back straight to prevent cervical spinal injuries. Although the EMTs were doing their best, it was obvious that the football helmet, pads, and gear made it difficult to examine the patient and log roll the injured player onto the backboard for spinal immobilization and transport. Even from the bleachers, Spanton could see the player's spine being twisted and bent while EMTs packaged the patient. As he cringed, he tho

Shawn Bloemker

The session would be taught as part of a program that provides free training to thousands of firefighters in Illinois. My goal was to create a class that would teach firefighters the fire behavior terminology and smoke indicators that were necessary to recognize rapid fire events at the speed at which they occur in the field. This presented numerous challenges. The biggest challenge was the way fire behavior is traditionally taught.

Fire Behavior Training

Properly teaching fire behavior requires more than just providing a short lecture on the topic. I wanted to create a proactive approach that incorporates multiple steps. Each step would build on the previous one to accomplish its goal, similar to climbing a ladder. Unfortunately, most firefighters are expected to be ready for action after just the first step.

Although a PowerPoint® lecture is a great way to lay the foundation of terminology for future firefighters and a way for current firefighters to refresh, it is only the first step in understanding how fire behaves. Since many firefighters learn from hands-on demonstration and personal experience, I knew that integrating a live demonstration would be a much more impactful way to teach the class.

When I began teaching the class, I would ignite candles to show how the candle went from a solid to a liquid to a gas. While the candle was burning, I would review a few key fire behavior definitions to ensure that a good foundation was laid. I would then blow out the candle and reignite the smoke that was above it, causing the wick to reignite to show the definitions of ignition temperature and fire point. This demonstration created the opportunity to talk about how the smoke firefighters are crawling under is really a detached gas phase looking for an ignition source.

1 The Max Fire Box is designed to demonstrate rapid fire and smoke behavior in a compartmentalized space without the use of a burn tower or an acquired structure. (Photos by Drew Mitchell.)

By burning the candle, I demonstrated fire behavior in a limited capacity. My next challenge was to find a way to demonstrate rapid fire and smoke behavior in a compartmentalized space without the use of a burn tower or an acquired structure.

Initially, I met this challenge by using wooden boxes that were designed to allow students to witness rapidly changing conditions in a compartment during a fire. This method was successful for one of my main goals-getting students out of the classroom to see smoke behavior and rapid fire events in a controlled environment. It became the second step that prepared students for acquired structure burns and proved to be very beneficial for students. However, it had very distinct flaws. It required continuous construction of wooden boxes and had a limited burn time. Additionally, no matter how good my carpentry skills were, as the fire heated up, the wooden boxes eventually would open up at the joints, allowing too much air into the box, thereby limiting the smoke and rapid fire events I wanted to show.

After several months of burning and redesigning, I developed a reusable steel prop that provided the solution to all of the problems with the wooden boxes. In fact, it provided the solution not only to my challenges but also for live fire training. The pate

By Alan M. Petrillo

For many years, the typical kinds of coverings found on fire trucks were either swing-out or swing-up doors, the latter of which sometimes provided a sort of awning during inclement weather. But in recent years, roll-up doors have made big inroads into fire apparatus design, so much so that their popularity continues to increase year by year.

Not New to the Fire Service

Steve Touchton, emergency products manager for R-O-M Corporation, says his company has been in business more than 60 years and has made roll-up doors since the early 1980s, first for the European market. "We were the first company to bring roll-up shutters to the United States and the fire market," Touchton says. "We now make the Series III roll-up shutter and have about 80 percent of the United States fire market."

1 R-O-M Corporation makes Series III vertical roll-up doors of aircraft-grade 6063T6 aluminum alloy, shown here in the partially opened position. (Photo courtesy of R-O-M Corporation.)

A&A Manufacturing, makers of Gortite roll-up doors, got into making roll-up doors for the fire industry in 2000, Ken Czyzewski, sales and marketing manager, says and has 40 years of experience in making roll-up covers for the machine tool industry. "All Gortite roll-up doors are available with manual and power lock options, as well as LED lighting and door ajar switches," he adds. "We also make a walk-on hosebed cover that retracts to the back end of the hosebed. It's a stainless steel skin with aluminum ribs for reinforcement and will hold 250 pounds every two feet of length."

Ray Van Gunten, president of Dover Roller Shutters Inc., says his firm is part of AM Group, which owns Diamond Roll-Up Doors and purchased Dover Roller Shutters in England in 2004. "We had been making roll-up doors under the Diamond name since the 1990s, but now it is all under the Dover name," Van Gunten says.

2 DuroStrip LED compartment lighting is built into the roll-up doors that R-O-M Corporation fabricated for this Seagrave pumper. (Photo courtesy of R-O-M Corporation.

John Seehof, president of Hansen International Inc., says his firm has been in business for 40 years providing D-ring door hardware for swing-out and swing-up compartment doors and also makes roll-up doors for the fire service. "Ten years ago, we surveyed firefighters about what they wanted to see in roll-up doors," Seehof says. "They wanted better hand clearance, an unlatched door indicator, and the ability to have a custom-designed door. We addressed all those issues for them."

Construction

Czyzewski says, "Everyone's roll-up doors are fairly similar in design, with individual slats hinged together to form the door. They are made out of aluminum and have a weather seal in between the slats to keep out dust, dirt, moisture, and road salts."

Read more 803 0 Article rating: No rating RSS FirstPrevious4814481548164817481848194820482148224823NextLast Theme picker Section Quick Links   Fire Mechanics Documents EVT Discussion Forum Fire Mechanic Photo Gallery Training & Testing 2019 Scholarship Logo Wear Store Upcoming Events Theme picker Sponsors Fire Mechanics Section Board Chair Posted: Oct 21, 2015 Chair Elliot Courage North Whatcom Fire & Rescue Read more 0 0 Article rating: No rating Vice Chair Posted: Oct 21, 2015 Vice Chair Mike Smith  Pierce County Fire District #5 Read more 0 0 Article rating: No rating Secretary Posted: Oct 21, 2015 Secretary Greg Bach South Snohomish County Fire & Rescue Read more 0 0 Article rating: No rating Director #1 Posted: Oct 21, 2015 Director #1 Doug Jones South Kitsap Fire & Rescue Read more 0 0 Article rating: No rating Director #2 Posted: Oct 21, 2015 Director #2 Paul Spencer  Fire Fleet Maintenance LLC Read more 0 0 Article rating: No rating Director #3 Posted: Oct 21, 2015 Director #3 Jim Morris Mountain View Fire Department Read more 0 0 Article rating: No rating Director #4 Posted: Oct 21, 2015 Director #4 Arnie Kuchta Clark County Fire District 6 Read more 0 0 Article rating: No rating Director #6 Posted: Oct 21, 2015 Director #6 Brett Annear Kitsap County Fire District 18 Read more 0 0 Article rating: No rating Director #5 Posted: Oct 21, 2015 Director #5 Jay Jacks Camano Island Fire & Rescue Read more 0 0 Article rating: No rating Legislative Representative Posted: Oct 21, 2015 Legislative Representative TBD TBD Read more 3512 0 Article rating: No rating Immediate Past Chair Posted: Oct 20, 2015 Immediate Past Chair Brian Fortner Graham Fire & Rescue Read more 0 0 Article rating: No rating RSS Theme picker 2020 CAR SHOW Terms Of Use | Privacy Statement - Copyright 2025 by Washington Fire Chiefs Home Members About Us News Calendar Resources Documents Sections County Fire Chiefs FRWC WSAFM