Menu

Welcome

The Finest Supporting the Bravest!

The purpose of the Fire Mechanics Section is to promote standardization of fire apparatus and equipment preventative maintenance, improve safety standards and practices, promote workshops, conferences, and seminars related to the purposes of this Section, and to promote cost savings through standardization of building and equipment purchasing and maintenance.

RECENT FIRE MECHANIC NEWS

Posted: Nov 14, 2016

Oregon Collector Restores Three Vintage Fire Engines

CLICK ABOVE FOR A FULL GALLERY OF MELO'S ANTIQUES >>

By Ron Heal

What happens to vintage fire apparatus once their fire service time is finished? Over the past several decades there have been many of answers to that question. Some rigs get pushed into a back corner in the fire station; others get set out behind the station where they continue to age; still others are taken to the scrap metal yard to be run over the scales and sold for scrap. The best answer to that question is when a vintage fire apparatus enthusiast learns about the surplus rig and buys the rig to take home and restore the fire engine to like new status.

Wes Melo, now a retired executive living in Roseburg, Oregon has been interested in fire apparatus as far back as he can remember. Growing up in Mt. Shasta, California, Melo had ample opportunity to be at the local fire station. His father, Frank Melo served the local fire department for 52 years, with many of those years as fire chief. Tucked in the back corner of the fire station was a 1915 Ford Model T-Hallock chemical fire engine. Melo remembers the many times that he would climb onto the nicely restored rig to ring the bell and crank up the Sterling hand crank siren. The chemical fire truck was not an original part of the Mt. Shasta Fire Department. Chief Melo found the rig sitting out in a vacant lot over in Fort Jones, California. Nobody in Fort Jones wanted the old rig around. Chief Melo was welcome to take the rig home. That is exactly what he did. Keep in mind this was back in the 1930s. Chief Melo and some of his friends eventually brought the little rig into the basement of his house to do a complete restoration. When they were done, the Mt. Shasta (CA) Fire Department had a very nice parade piece of fire apparatus. By then young Melo was hooked on fire apparatus. Years later, Melo would learn that the 1915 Ford Model T-Hallock was very rare. It carried the serial number 4. It was the only rig to ship to the west coast from the Hallock factory in Medina, Ohio. Hallock manufactured 22 fire engines in the period of 1913 to 1918.

Melo hoped that one day he might inherit his dad’s fire engine. That was not to be the case. While he was serving with the Army overseas, Chief Melo donated the rig to the Sisson Museum in Mt. Shasta. The rig is still on display today. Melo would spend the next several decades as an industrial executive, moving several times to various parts of the country. Many of his moves gave him the opportunity to serve various volunteer fire departments.

In 1999, Melo and his daughter were surfing the Web when they came across a 1915 American LaFrance/Ford Model T Type A chemical fire engine for sale. The rig was in Las Cruces, New Mexico. Wes drove to New Mexico and found a truck that was in very poor condition. Nevertheless he bought the rig and loaded it up for the trip back to Roseburg. Melo admits that at that point he had very few restoration skills. He contacted friends, restoration experts, historians and anyone else who might help him in a complete restoration project. His restoration would take nine years, and, over that time, Melo gained many restoration skills. Since this apparatus was an American LaFrance, one contact Melo made was to noted American LaFrance historian John Peckham. Peckham advised Melo that the 1915 rig may be the second oldest rig of its kind known to still exist.

Melo recalls some of the major issue

Read more
Posted: Nov 14, 2016

Fire Truck Photo of the Day-Darley Pumper

Big Run Area (PA) Volunteer Fire Company Vision pumper. Navistar 7300 SFA 4x4 cab and chassis; Cummins ISB 340-hp engine; Darley/Champion PSP 1,500-gpm pump.

Read more
Posted: Nov 11, 2016

WARS Shows Off Its Heavy Rescue

Squad 505, Western Albemarle Rescue Squad's new heavy rescue truck, entered service in July after three years of effort to realize its existence. The squad held an open house Oct. 8 to show it off to the public and promote interest in the emergency service.

WARS Chief Kostas Alibertis reported that 20 people had come by. The volunteers had brought their kids, too, to show that volunteering is family-friendly. “Our best recruitment is through the EMT classes, or word-of-mouth from members. We get good PR from them.”

“Our primary mission is emergency transport, but now we’re doing other technical rescues, too,” said Patrick Watson. “Those are different from an EMS call.”

The squad truck, as it’s called by the volunteers, replaces a 1993 GMC that had done its best and was easier to get into the bay. The new truck, 33-feet long and weighing 20 tons, barely clears the 9-foot, 8-inch bay door. Top clearance is two inches. It has an hydraulic four-wheel drive system that allows the truck to ‘kneel’ through the doorway as it backs into the bay.

“It’s a large moving tool box,” said Watson. “It has a 20-year life expectancy. What are the needs of Crozet going to be in 2034?

It has a superior 30-kilowatt generator and it carries 60 gallons of diesel fuel to keep it going a long time. “No other truck in the county can light up anything like this truck can.” All the lights are LEDs, including the headlights. In all, it can produce 900,000 lumens of light. (A light bulb is a couple of hundred lumens.)

“The squad truck is most often used for car accidents, especially if it appears a passenger can’t get out or a car is over a bank. It has lots of lighting to be a safety feature. Putting it at a scene as a barrier defends workers at the wreck site.”

WARS designed the truck’s configuration. It took two years to plan it and another to build it. The Seagrave chassis was built in Clintonville, Wisconsin. The box it carries in the rear was made by SVI Truck in Fort Collins, Colorado. Watson and Alibertis flew to both places twice to consult on construction. “It’s the difference between your architect and your builder,” said Watson.

The truck cost $897,000 in the County’s Capital Improvements Program, plus some extra expenses that bring the cost to $1M. It’s the second most expensive piece of fire/rescue equipment after a ladder truck because it is so specialized. Replacement value is pegged at $1.2M. The powerful truck can actually gain speed climbing Afton Mountain, thanks to its 500 horsepower engine. It’s also geared to handle the mountain.

The two-seat heavy

Read more
Posted: Nov 11, 2016

Tiller Truck Joins Fire Fleet

The Tracy Fire Department is moving to traditional fire truck operation as leaders look to add two tractor-drawn aerials, known as tiller trucks, to the fleet. A 2000 American LaFrance tiller truck with a 100-foot ladder, bought by the Tracy Rural Fire District for $40,000, arrived in late October.

The department also wants to buy a brand new tiller truck to become the department’s first-out response fire truck, replacing 18-year-old Truck 91, housed at Station 91 on 11th Street.

The department will go before the City Council on Dec. 6 to ask for $1.2 million to buy the new tiller truck, a need that Chief Randall Bradley says is coming as the city grows.

“Based upon our size, based on the complexity of our city, we needed a dedicated truck that has the flexibility to get into tight places,” Bradley said.

Truck 91, a 1998 Pierce/Dash 100-foot aerial, is due for replacement, and a committee spent months looking at options before making a recommendation.

“Our straight-frame, non-tiller truck has a pump, water and hose on it, and so it kind of operates as a dual-purpose piece of equipment, as a fire engine and a ladder truck, and what happens is you end up with a not-a-very-good fire engine and a not-a-very-good ladder truck,” Bradley said. “We’re migrating to something where the ladder truck traditionally has very specific roles and responsibilities on the fire ground. Rather than say we are going to use it as a ladder truck some days and a fire engine other days, we’re saying, because we are getting bigger and we now have the calls and the capacity to do so, we’re saying the importance of a ladder truck outweighs the dual purpose of the engine and the truck that’s combined.”

Bradley said the 60-foot-long tiller truck would focus on any type of rescue operations, large vehicle crashes that require extrications, and ventilation, rescue, salvage and overhaul at burning buildings.

Read more
RSS
First38253826382738283830383238333834Last

Theme picker

Upcoming Events

Theme picker

Sponsors

Fire Mechanics Section Board

Chair

Posted: Oct 21, 2015

Chair

Elliot Courage
North Whatcom Fire & Rescue
Read more

Vice Chair

Posted: Oct 21, 2015

Vice Chair

Mike Smith 
Pierce County Fire District #5
Read more

Secretary

Posted: Oct 21, 2015

Secretary

Greg Bach
South Snohomish County Fire & Rescue
Read more

Director #1

Posted: Oct 21, 2015

Director #1

Doug Jones
South Kitsap Fire & Rescue
Read more

Director #2

Posted: Oct 21, 2015

Director #2

Paul Spencer 
Fire Fleet Maintenance LLC
Read more

Director #3

Posted: Oct 21, 2015

Director #3

Jim Morris
Mountain View Fire Department
Read more

Director #4

Posted: Oct 21, 2015

Director #4

Arnie Kuchta

Clark County Fire District 6

Read more

Director #6

Posted: Oct 21, 2015

Director #6

Brett Annear
Kitsap County Fire District 18
Read more

Director #5

Posted: Oct 21, 2015

Director #5

Jay Jacks
Camano Island Fire & Rescue
Read more

Legislative Representative

Posted: Oct 21, 2015

Legislative Representative

TBD
TBD
Read more

Immediate Past Chair

Posted: Oct 20, 2015

Immediate Past Chair

Brian Fortner
Graham Fire & Rescue

Read more
RSS

Theme picker

2020 CAR SHOW