By Alan M. Petrillo

Manufacturers offer several systems to fire departments, districts, and emergency medical services squads in the way of station exhaust systems to remove toxic vehicle exhaust before it can become a problem in apparatus bays, station living quarters, and office spaces.

Exhaust systems for emergency services buildings fall into two categories of equipment: source capture systems that attach a hose directly to a vehicle’s exhaust pipe and hoseless exhaust removal and air filtration systems.

Hoseless Systems

Air Vacuum Corp. makes the AIRVAC 911 engine exhaust removal system, says John Koris, Air Vacuum’s regional sales manager. “It’s a fully automatic system that requires no personnel intervention,” he says, “and the system removes both gases and particulates from diesel exhaust.”

Koris says AIRVAC 911 is a ceiling-mounted filtration system that suspends two- by two- by two-foot units over exhaust points to create a direct path into and through the unit. “When a fire department gets a call, the doors open and trigger door switches that have a photo-beam backup, kicking on the system so it can pick up any backwash as the apparatus leaves,” Koris says. “When the apparatus returns, the system kicks on automatically and extracts any exhaust put into the building.”

1 The Tully (NY) Hose Company chose Air Vacuum Corp.’s AIRVAC 911 engine exhaust removal system for its fire station. (Photo courtesy of Air Vacuum Corp.)

Koris notes that Air Vacuum uses a smart timer to make the system fully automatic. “The smart timer, located on the apparatus room floor or in a utility or communications room, runs all of the units on a cycle, usually of 15 minutes, to remove all the exhaust in the apparatus bays,” he says. “It also has a manual override to turn the system on, like during cold months when you might keep doors closed but want to check chainsaws and other gas-powered equipment.”

The number of units installed in a system depends on the engineering standards for the space involved, Koris points out. “Typically, the standards for exhaust removal in a fire station call for four to six air changes in the cubic footage of the apparatus bay, so you might have one unit per bay or piece of apparatus or one unit every two or three bays.” Filter change in the units is typically based on the level of activity, Koris adds. “Carbon filters have a life cycle, and we recommend a maximum of 24 months of use for them,” he says. “The prefilter should be changed quarterly.”

2 Air Vacuum Corp. installed its AIRVAC 911 engine exhaust removal system in this station for the Westerly (RI) Fire Department. (Photo courtesy of Air Vacuum Corp.)

Daniel Orto, president of Air Technology Solutions, says his company makes the AirMATION vehicle diesel exhaust removal system. “It is a standalone, ceiling-suspended air filtration process,” Orto says, “powered by a 3,000-cubic-feet-per-minute (cfm) direct-drive blower that pulls, directs, and removes diesel exhaust fumes.” Ort

By Alan M. Petrillo

Manufacturers offer several systems to fire departments, districts, and emergency medical services squads in the way of station exhaust systems to remove toxic vehicle exhaust before it can become a problem in apparatus bays, station living quarters, and office spaces.

Exhaust systems for emergency services buildings fall into two categories of equipment: source capture systems that attach a hose directly to a vehicle’s exhaust pipe and hoseless exhaust removal and air filtration systems.

Hoseless Systems

Air Vacuum Corp. makes the AIRVAC 911 engine exhaust removal system, says John Koris, Air Vacuum’s regional sales manager. “It’s a fully automatic system that requires no personnel intervention,” he says, “and the system removes both gases and particulates from diesel exhaust.”

Koris says AIRVAC 911 is a ceiling-mounted filtration system that suspends two- by two- by two-foot units over exhaust points to create a direct path into and through the unit. “When a fire department gets a call, the doors open and trigger door switches that have a photo-beam backup, kicking on the system so it can pick up any backwash as the apparatus leaves,” Koris says. “When the apparatus returns, the system kicks on automatically and extracts any exhaust put into the building.”

1 The Tully (NY) Hose Company chose Air Vacuum Corp.’s AIRVAC 911 engine exhaust removal system for its fire station. (Photo courtesy of Air Vacuum Corp.)

Koris notes that Air Vacuum uses a smart timer to make the system fully automatic. “The smart timer, located on the apparatus room floor or in a utility or communications room, runs all of the units on a cycle, usually of 15 minutes, to remove all the exhaust in the apparatus bays,” he says. “It also has a manual override to turn the system on, like during cold months when you might keep doors closed but want to check chainsaws and other gas-powered equipment.”

The number of units installed in a system depends on the engineering standards for the space involved, Koris points out. “Typically, the standards for exhaust removal in a fire station call for four to six air changes in the cubic footage of the apparatus bay, so you might have one unit per bay or piece of apparatus or one unit every two or three bays.” Filter change in the units is typically based on the level of activity, Koris adds. “Carbon filters have a life cycle, and we recommend a maximum of 24 months of use for them,” he says. “The prefilter should be changed quarterly.”

2 Air Vacuum Corp. installed its AIRVAC 911 engine exhaust removal system in this station for the Westerly (RI) Fire Department. (Photo courtesy of Air Vacuum Corp.)

Daniel Orto, president of Air Technology Solutions, says his company makes the AirMATION vehicle diesel exhaust removal system. “It is a standalone, ceiling-suspended air filtration process,” Orto says, “powered by a 3,000-cubic-feet-per-minute (cfm) direct-drive blower that pulls, directs, and removes diesel exhaust fumes.” Ort

By Alan M. Petrillo

Manufacturers offer several systems to fire departments, districts, and emergency medical services squads in the way of station exhaust systems to remove toxic vehicle exhaust before it can become a problem in apparatus bays, station living quarters, and office spaces.

Exhaust systems for emergency services buildings fall into two categories of equipment: source capture systems that attach a hose directly to a vehicle’s exhaust pipe and hoseless exhaust removal and air filtration systems.

Hoseless Systems

Air Vacuum Corp. makes the AIRVAC 911 engine exhaust removal system, says John Koris, Air Vacuum’s regional sales manager. “It’s a fully automatic system that requires no personnel intervention,” he says, “and the system removes both gases and particulates from diesel exhaust.”

Koris says AIRVAC 911 is a ceiling-mounted filtration system that suspends two- by two- by two-foot units over exhaust points to create a direct path into and through the unit. “When a fire department gets a call, the doors open and trigger door switches that have a photo-beam backup, kicking on the system so it can pick up any backwash as the apparatus leaves,” Koris says. “When the apparatus returns, the system kicks on automatically and extracts any exhaust put into the building.”

1 The Tully (NY) Hose Company chose Air Vacuum Corp.’s AIRVAC 911 engine exhaust removal system for its fire station. (Photo courtesy of Air Vacuum Corp.)

Koris notes that Air Vacuum uses a smart timer to make the system fully automatic. “The smart timer, located on the apparatus room floor or in a utility or communications room, runs all of the units on a cycle, usually of 15 minutes, to remove all the exhaust in the apparatus bays,” he says. “It also has a manual override to turn the system on, like during cold months when you might keep doors closed but want to check chainsaws and other gas-powered equipment.”

The number of units installed in a system depends on the engineering standards for the space involved, Koris points out. “Typically, the standards for exhaust removal in a fire station call for four to six air changes in the cubic footage of the apparatus bay, so you might have one unit per bay or piece of apparatus or one unit every two or three bays.” Filter change in the units is typically based on the level of activity, Koris adds. “Carbon filters have a life cycle, and we recommend a maximum of 24 months of use for them,” he says. “The prefilter should be changed quarterly.”

2 Air Vacuum Corp. installed its AIRVAC 911 engine exhaust removal system in this station for the Westerly (RI) Fire Department. (Photo courtesy of Air Vacuum Corp.)

Daniel Orto, president of Air Technology Solutions, says his company makes the AirMATION vehicle diesel exhaust removal system. “It is a standalone, ceiling-suspended air filtration process,” Orto says, “powered by a 3,000-cubic-feet-per-minute (cfm) direct-drive blower that pulls, directs, and removes diesel exhaust fumes.” Ort

By Chris Daly

A recent incident in my county has demonstrated the importance of installing vehicle data recorders in emergency vehicles. A local resident made the following post on his Facebook page in reference to fire apparatus that were responding to a working house fire:

“Not sure what the emergency in XXXXX is but XXXX Fire Company does not need to come down XXXXX Hill in equipment at Mach 3. Someone is going to get hurt! Please share!”

As social media goes, there was an immediate buzz from both sides of the issue. No matter which side you are on, there are several important lessons to be learned from this incident.

Truth?
First, the truth doesn’t matter. Regardless of the outcome of an internal investigation, the die has been cast. This resident has made a post that suggests fire apparatus were not operated safely while traveling through his neighborhood. Even if an internal investigation reveals that this statement was untrue, it will be very difficult to try and put the genie back in the bottle. The people who read the statement are not likely to read follow-up posts that prove or disprove the allegations. They will turn off their electronic device for the day, believing that firefighters drive irresponsibly. As a police officer, I will tell you: “Welcome to our world.”

As the saying goes, an ounce of prevention is worth a pound of cure. If this complaint turns out to be justified, the incident demonstrates how a single action can taint the reputation of an entire profession through the use of social media. If the emergency vehicle driver had driven in a responsible manner, the complainant would not have had a reason to post his opinion on social media. However, because there was some question in the complainant’s mind regarding the operation of the fire apparatus, he felt obligated to share his opinion with the world. Holding drivers responsible for speeding, failing to come to complete stops, and reckless or unsafe driving will help ensure a culture of safe drivers that will help prevent a similar public relations incident in the future.

Vehicle Data Recorders
This incident also highlights the importance of using vehicle data recorders in fire apparatus. The newest version of NFPA 1901, Standard for Automotive Fire Apparatus, requires that all new apparatus be equipped with a vehicle data recorder, commonly referred to as a “black box.” NFPA 1901, Section 4.11 requires that these devices record the following information at least once every second and store the information in a 48-hour loop:

While these devices have been met with some resistance because of issues related to “big brother watching,” I am a firm believer in their use. For those who worry about big brother watching, I ask, “What are you afraid of?” If your department is operating emergency apparatus in a safe and professional manner, there will be no need to worry about the data being recorded by the black box. Instead this data can be used to refute vague allegations such as those made in this example. Was the fire apparatus really driving at “Mach 3?” Or, did the complainant have a false sense of speed and urgency because of his point of observation and the sound of the sirens? In this case, black box data could be used to prove one way or the other if th