Search
Menu
News

WFC News

Fire Chief Asks Springfield (MO) City Leaders to Close Two Fire Stations
Fire Chief Asks Springfield (MO) City Leaders to Close Two Fire Stations
Posted: Dec 6, 2016

Fire Chief Asks Springfield (MO) City Leaders to Close Two Fire Stations

The Springfield Fire Department wants the city to close two fire houses to improve response times in areas of higher activity. The fire department recommends closures of fire station 6, on West Battlefield Road near Scenic Avenue, and fire station 12, on Blackman Road near Battlefield Road.
It suggests fire station 6 have its staff and apparatus relocated to assist in covering west-central Springfield. The fire station 12 staff and equipment would help serve south-central Springfield.

The fire department conducted a staffing and deployment study to significantly improve its response time and meet areas of greater demand in the community.

"It is essential to use our resources as efficiently and effectively as we can," said Fire Chief David Hall. "Over the past several years, we have developed the data to be able to make data-driven informed decisions on station, apparatus, and personnel placement in a way we previously could not. When one looks at the data, it is hard to see how any other conclusion can be drawn."

Several years ago, resources from the core of the city were redistributed to open each of the two stations with anticipation of annexation occurring in east and southwest Springfield. However, annexations have not occurred.

"My mother lives in Station 12's district and my mother-in-law lives in Station 6's district, each of which will be affected if those stations no longer house fire apparatus and personnel," said Chief Hall. "I would never put them at undue risk; however, I cannot in good conscience not put resources where they provide the greatest benefit to all citizens of the community. This moves resources to those citizens with the greatest risk and yet lacking the fire protection that is needed in their area."

Read More at Ky3
Read more
  • 536
  • 0
  • Article rating: No rating
Posted: Dec 6, 2016

Product News

The Hannay FF Series standard booster reels are designed to handle 1¼- or 1½-inch I.D. booster hoses or 1½- or 1¾-inch I.D. collapsible hose. The booster hose reel is steel-painted graphite with aluminum, but stainless steel construction is also available. A gear-driven crank rewind and pinion brake come standard with options for a chain-and-sprocket drive powered by electric, hydraulic, or compressed-air motor.

Rollers and roller-mounting brackets are accessory items that can be added on request. The Series can handle pressures up to 600 psi. A Super Booster® reel is an available option, which weighs up to 30 percent less than the standard booster reel because of its aluminum construction. www.hannay.com, 877-467-3357

The Ajax Rescue Tools Extrication Tomahawk rescue tool’s hardened point is for breaking glass, making purchase points in laminated glass, use as a tire punch, and making a strut insertion point in the body of a vehicle. It also features a pry bar for making a purchase point in door, hood, or trunk seams for a hydraulic tool insertion and prying off hatch and trunk gas struts; a gas shut-off valve wrench; and a flat surface for hammering in cribbing, wedges, or striking surface for driving points into objects.

Other features of the tool include a laminated glass saw, beveled plastic cutter, large trim puller, spanner wrench, glass notch, antenna remover, valve stem puller, gasket puller, and beveled edge for removing trim. www.ajaxrescuetools.com, 800-323-9129

The Harrison “HYDRA-SKID” Short-Bed Brush Kit package is developed to work with any of the Ford F-Series chassis factory-ordered with a Ford Live Drive power takeoff (PTO) provision and using a Harrison Hydra-Drive. The HYDRA-SKID harnesses the power of the Harrison IHT-HQ system to deliver a compact package for powering up 150-gpm water pumps in stationary or in true NFPA pump-and-roll conditions.

Simplified operation is achieved and any speed with the flick of a switch. Features include 10 percent shorter wheelbase, 20 percent shorter box length, 20 percent lower chassis cost, and 25 percent more water capacity. www.harrisonhydragen.com, 800-723-3334

The Agri Drain Warthog Floating Pump is a rugged, highly-efficient pump that pumps water at a rate of 850 gpm for fast, efficient water removal or retrieval. The pump weighs approximately 85 pounds, allowing for the setup and use of the pump to be a one-person job. With the optional floating fuel tank, you can increase the typical run time from around one hour to approximately 12 to 15 hours between refueling intervals. Just set it in the water, roll out the hose, pull the cord, and walk away.

The Warthog Floating Pump is great for water removal as well as supplying water from a remote water source. The pump’s 400-foot hose can move water from a flooded area or can take water from a water source and supply it to an area where it is urgently needed. www.agridrain

Read more
  • 408
  • 0
  • Article rating: No rating
Posted: Dec 6, 2016

Product News

The Hannay FF Series standard booster reels are designed to handle 1¼- or 1½-inch I.D. booster hoses or 1½- or 1¾-inch I.D. collapsible hose. The booster hose reel is steel-painted graphite with aluminum, but stainless steel construction is also available. A gear-driven crank rewind and pinion brake come standard with options for a chain-and-sprocket drive powered by electric, hydraulic, or compressed-air motor.

Rollers and roller-mounting brackets are accessory items that can be added on request. The Series can handle pressures up to 600 psi. A Super Booster® reel is an available option, which weighs up to 30 percent less than the standard booster reel because of its aluminum construction. www.hannay.com, 877-467-3357

The Ajax Rescue Tools Extrication Tomahawk rescue tool’s hardened point is for breaking glass, making purchase points in laminated glass, use as a tire punch, and making a strut insertion point in the body of a vehicle. It also features a pry bar for making a purchase point in door, hood, or trunk seams for a hydraulic tool insertion and prying off hatch and trunk gas struts; a gas shut-off valve wrench; and a flat surface for hammering in cribbing, wedges, or striking surface for driving points into objects.

Other features of the tool include a laminated glass saw, beveled plastic cutter, large trim puller, spanner wrench, glass notch, antenna remover, valve stem puller, gasket puller, and beveled edge for removing trim. www.ajaxrescuetools.com, 800-323-9129

The Harrison “HYDRA-SKID” Short-Bed Brush Kit package is developed to work with any of the Ford F-Series chassis factory-ordered with a Ford Live Drive power takeoff (PTO) provision and using a Harrison Hydra-Drive. The HYDRA-SKID harnesses the power of the Harrison IHT-HQ system to deliver a compact package for powering up 150-gpm water pumps in stationary or in true NFPA pump-and-roll conditions.

Simplified operation is achieved and any speed with the flick of a switch. Features include 10 percent shorter wheelbase, 20 percent shorter box length, 20 percent lower chassis cost, and 25 percent more water capacity. www.harrisonhydragen.com, 800-723-3334

The Agri Drain Warthog Floating Pump is a rugged, highly-efficient pump that pumps water at a rate of 850 gpm for fast, efficient water removal or retrieval. The pump weighs approximately 85 pounds, allowing for the setup and use of the pump to be a one-person job. With the optional floating fuel tank, you can increase the typical run time from around one hour to approximately 12 to 15 hours between refueling intervals. Just set it in the water, roll out the hose, pull the cord, and walk away.

The Warthog Floating Pump is great for water removal as well as supplying water from a remote water source. The pump’s 400-foot hose can move water from a flooded area or can take water from a water source and supply it to an area where it is urgently needed. www.agridrain

Read more
  • 519
  • 0
  • Article rating: No rating
Posted: Dec 6, 2016

Product News

The Hannay FF Series standard booster reels are designed to handle 1¼- or 1½-inch I.D. booster hoses or 1½- or 1¾-inch I.D. collapsible hose. The booster hose reel is steel-painted graphite with aluminum, but stainless steel construction is also available. A gear-driven crank rewind and pinion brake come standard with options for a chain-and-sprocket drive powered by electric, hydraulic, or compressed-air motor.

Rollers and roller-mounting brackets are accessory items that can be added on request. The Series can handle pressures up to 600 psi. A Super Booster® reel is an available option, which weighs up to 30 percent less than the standard booster reel because of its aluminum construction. www.hannay.com, 877-467-3357

The Ajax Rescue Tools Extrication Tomahawk rescue tool’s hardened point is for breaking glass, making purchase points in laminated glass, use as a tire punch, and making a strut insertion point in the body of a vehicle. It also features a pry bar for making a purchase point in door, hood, or trunk seams for a hydraulic tool insertion and prying off hatch and trunk gas struts; a gas shut-off valve wrench; and a flat surface for hammering in cribbing, wedges, or striking surface for driving points into objects.

Other features of the tool include a laminated glass saw, beveled plastic cutter, large trim puller, spanner wrench, glass notch, antenna remover, valve stem puller, gasket puller, and beveled edge for removing trim. www.ajaxrescuetools.com, 800-323-9129

The Harrison “HYDRA-SKID” Short-Bed Brush Kit package is developed to work with any of the Ford F-Series chassis factory-ordered with a Ford Live Drive power takeoff (PTO) provision and using a Harrison Hydra-Drive. The HYDRA-SKID harnesses the power of the Harrison IHT-HQ system to deliver a compact package for powering up 150-gpm water pumps in stationary or in true NFPA pump-and-roll conditions.

Simplified operation is achieved and any speed with the flick of a switch. Features include 10 percent shorter wheelbase, 20 percent shorter box length, 20 percent lower chassis cost, and 25 percent more water capacity. www.harrisonhydragen.com, 800-723-3334

The Agri Drain Warthog Floating Pump is a rugged, highly-efficient pump that pumps water at a rate of 850 gpm for fast, efficient water removal or retrieval. The pump weighs approximately 85 pounds, allowing for the setup and use of the pump to be a one-person job. With the optional floating fuel tank, you can increase the typical run time from around one hour to approximately 12 to 15 hours between refueling intervals. Just set it in the water, roll out the hose, pull the cord, and walk away.

The Warthog Floating Pump is great for water removal as well as supplying water from a remote water source. The pump’s 400-foot hose can move water from a flooded area or can take water from a water source and supply it to an area where it is urgently needed. www.agridrain

Read more
  • 294
  • 0
  • Article rating: No rating
Posted: Dec 6, 2016

Recent Apparatus Orders

Florida

Sutphen-South Trail Fire District, Fort Myers, rescue-pumper. Monarch cab and chassis; Cummins ISL 450-hp engine; Hale Qmax 1,500-gpm pump; UPF Poly 750-gallon tank; Harrison 10-kW generator. Sold by: David Stonitsch, South Florida Emergency Vehicles, Fort Myers, FL. Delivery in July 2017.

Sutphen-New Smyrna Beach Fire Department SPH 100 platform quint. Monarch cab and chassis; Cummins ISX 500-hp engine; 100-foot aerial platform; Hale Qmax 1,500-gpm pump; UPF Poly 300-gallon tank; Harrison 10-kW generator. Sold by: Guy Lombardo, South Florida Emergency Vehicles, Fort Meyers, FL. Delivery in June 2017.

Sutphen-New Smyrna Beach Fire Department pumpers (two). Monarch cabs and chassis; Cummins ISL 450-hp engines; Hale Qmax 1,500-gpm pumps; UPF Poly 750-gallon tanks. Sold by: Guy Lombardo, South Florida Emergency Vehicles, Fort Myers, FL. Delivery in June 2017.

Sutphen-Pinellas Park Fire Rescue SLR-75 aerial quint. Monarch cab and chassis; Cummins ISL 450-hp engine; Hale Qmax 1,500-gpm pump; UPF Poly 500-gallon tank; 75-foot aerial ladder. Sold by: Guy Lombardo, South Florida Emergency Vehicles, Fort Myers, FL. Delivery in June 2017.

Sutphen-Riviera Beach Fire Rescue pumper. Monarch cab and chassis; Cummins ISL 450-hp engine; Hale Qmax 1,500-gpm pump; UPF Poly 750-gallon tank. Sold by: David Stonitsch, South Florida Emergency Vehicles, Fort Myers, FL. Delivery in February, 2017.

Sutphen-Brevard County Fire Rescue, Rockledge, pumpers (two). Monarch cabs and chassis; Cummins ISL 450-hp engines; Hale Qmax 1,500-gpm pumps; UPF Poly 750-gallon tank first vehicle; 1,500-gallon tank second vehicle. Sold by Guy Lombardo, South Florida Emergency Vehicles, Fort Meyers, FL. Delivery in March 2017.

Sutphen-Palm Beach County Fire Rescue, West Palm Beach pumpers (two). Monarch cabs and chassis; Cummins ISL9 450-hp engines; Hale Qmax 1,500-gpm pumps; UPF Poly 1,000-gallon tanks; 30-gallon foam cells; Hale FoamLogix 5.0 single-agent foam systems. Sold by David Stonitsch, South Florida Emergency Vehicles, Fort Myers, FL. Delivery in March 2017.

Illinois

Pierce-Glenview Fire Department pumper. Arrow XT cab and chassis; Detroit DD13 505-hp engine; Waterous CSU 1,500-gpm pump; UPF Poly 500-gallon tank; 10-gallon and 40-gallon foam cells; Elkhart Eductor 240-125P Class A and B foam system; Harrison 3.6-kW generator. Sold by Rick Berndt, Global Emergency Products, Aurora, IL. Delivery in April 2017.

Ferrara-Marissa Fire Protection District pumper. Cinder cab and chassis; Cummins ISL9 400-hp engine; Hale Qmax 1,500-gpm pump; UPF Poly 1,000-gallon tank; 10-gallon foam cell. Sold by Scott Pennington, Mid-America, Bonnie, IL. Delivery in April 2017.

Pierce-Olney Fire Department PUC pumper. Enforcer cab and chassis; Detroit DD13 525-hp engine; Pierce 1,500-gpm single-stage pump; UPF Poly 1,450-gallon tank; Harrison 6-kW generator. Sold by Rob McAtee and Greg Hinkens, Global Emergency Products, Aurora, IL. Delivery in June 2017.

Indiana

Alexis-Washington Township Volunteer Fire Department, Buck Creek, rescue. Spartan Metro star cab and chassis; Cummins ISL9 380-hp engine; 18-foot walk-around rescue; Command Light Knight 2 light tower; Smart Power 10-kW generator. Sold by Eric Foreman, Alexis Fire Equipment, Alexis, IL. Delivery in July 2017.

Iowa

Pierce-Marshalltown Fire Department utility truck. Ford F-550 cab and chassis; Ford Power Stroke 330-hp engine; EJ Metals 10-gpm UHP system pump; 100-gallon tank; 7-foot utility body; Code 3 emergency lighting package. Sold by Dustin Scholz, Reliant Fire Apparatus, Slinger, WI. Delivery in August 2017.

Read more

  • 500
  • 0
  • Article rating: No rating
RSS
First68336834683568366838684068416842Last

Theme picker

Filter News Catagories

Search News Articles

Terms Of Use | Privacy Statement - Copyright 2025 by Washington Fire Chiefs