A fire camp set up in North Spokane has given crews working in the area a place to recuperate. The high temperatures and steep terrain have given firefighters a difficult time battling both fires and their own exhaustion. "They're putting in some long hard hours in the heat and this camp is set up to take care of them," said Sarah Foster of the Washington Incident Management Team.
- PUB DATE: 7/8/2015 10:59:51 PM - SOURCE: Northwest Cable News

Neighbors in a southern Snohomish community watched carefully Wednesday as a brush fire got a little too close for comfort. About 60 firefighters battled the roughly one-acre fire and were able to keep it from spreading or damaging any homes. Nearby residents were told to be ready to leave if they had to, but fire crews got the blaze under control before that was necessary.
- PUB DATE: 7/8/2015 10:45:48 PM - SOURCE: KOMO-TV ABC 4 and Radio 1000

RICHARD MARINUCCI

Many departments establish apparatus committees to draft specifications for new vehicles, determine replacement schedules, and recommend ongoing maintenance.

This is a good approach that gets buy-in from the organization and mostly delivers better end products. But, and there is always a "but," establishing and managing the committee can be counterproductive if it does not follow proper diligence. A committee working as intended will produce the best possible results. On the other hand, remember the old adage that a "camel is a horse designed by committee."

Committee Makeup

How big a committee is necessary? That depends. What is the size of the organization, and are there any political considerations? A committee with three to seven members is probably best, provided that members represent those with a vested interest. While an odd number is recommended to break any ties, a better approach is to reach consensus so everyone is satisfied and you don't develop bad feelings. There should be representation from firefighters, company officers, drivers and operators, command staff, and someone who works on the vehicles. Each of these people brings a different perspective based on their job responsibilities. This number is not set in stone and can vary. The important concept is to get input and feedback from various stakeholders. Conversely, inviting everyone who is interested is probably not the best approach. Organizations with good labor management will want to include a union representative. This could be one of the members mentioned above or an additional person.

There needs to be a committee chair. This doesn't necessarily need to be the most senior-ranking person. It needs to be someone with a passion and an ability to manage the committee. He needs facilitation skills to elicit the necessary information and to make sure there is participation from all committee members. Detailed knowledge of apparatus nuts and bolts is not necessary, but there must be a general understanding so that the big picture remains in focus throughout the process. The chair needs support from the fire chief, department leadership, and even the administration above the fire chief. This could be the mayor's office, the city manager, or the fire board.

The Rules

The committee needs a balanced perspective, and it must establish a set of rules regarding its operation. There needs to be some general direction given to the committee to create the parameters, including budget constraints and any political issues that could affect final decisions. For example, there could be a local policy regarding where the vehicle is manufactured, giving preference to companies within the same state. As much predetermined information as possible must be provided so that the committee knows its boundaries and doesn't develop concepts it cannot support. The committee needs a target; changing the target or moving it after the committee has done a bulk of its work will demoralize the group and will hinder future production.

Clearly define the committee's role. Is it expected to provide general specifications for new apparatus or will it have an expanded role? Committees can be used for a "cradle-to-grave" approach. This includes not only acquiring apparatus but maintaining it and establishing a replacement schedule. Again, establishing parameters for the committee in all areas is very important. Some people accept appointments only to find out later that they don't get their way on every issue. This leads to frustration and worse. Clearly identify what can and cannot be done and the expected recommendations. Also explain to all committee members the d

BY BILL ADAMS

The Rush (NY) Fire District operates three pumpers, a heavy rescue, an ambulance, a combination brush and utility vehicle, an all-terrain vehicle, and two trailer-towed boats out of two stations covering about 40 square miles in western New York. Staffing is about 50 strong-all volunteer and provided by the Rush Fire Department, Inc. Sixty percent of the district's 392 calls in 2014 were emergency medical services-related.

In early 2012, the district's apparatus purchasing committee (APC) began planning the purchase of a replacement pumper. In mid April, the committee recommended that the district retain an outside (third party) spec writer to "interact with apparatus manufacturers to coordinate preparing purchase specifications" for the new pumper.

The district did not retain the spec writer as a professional consultant. The objective was to consolidate the APC's ideas and coordinate with apparatus manufacturers (OEMs) in preparing an "open" specification. It was agreed the spec writer could challenge the APC and make suggestions only to improve the purchasing process-not the committee's decisions on content. As an example, the quantity of hard suctions specified by the APC was not subject to debate; how and where to store them was open to suggestions and recommendations.

Articles describing new purchases usually heap praise on the manufacturer and the local dealership describing how helpful both were. APCs receive equal accolades for their work. Seldom heard from is the local salesperson who directly interacts with a purchaser. 4 Guys Fire Apparatus was the successful bidder for the Rush pumper. Frank Riccobono is a salesperson for Firehouse Apparatus, Incorporated, the local 4 Guys dealer. He agreed to be interviewed for this article. His answers below are very interesting.

Initial Design and Layout

Did you feel isolated from the apparatus purchasing committee?

To a degree, yes. When you see the spec for the first time, you try to imagine exactly what they are trying to build. With most customers, we'll meet several times before the truck goes out to bid, so even if the customer publishes another manufacturer's specification, you have a good handle on what they are trying to build. If a purchaser elects to use a spec writer or a consultant, the APC needs to remember to allow sufficient time for the bidders, as we are starting with a blank sheet of paper. With Rush, it was not an issue. Sometimes it is.

Did you think anything was missed by not working directly with the APC?

The one thing that was missing is you don't get a chance to build a good rapport beforehand. Normally, when you work directly with an APC, you have the opportunity to showcase your product. You also get a feel for whether you have a chance selling the truck. You get to meet each committee member before the bid. In this particular case, I didn't have a good feeling until the APC invited me to sit down and discuss our proposal. This first sit-down is where I was introduced to each committee member.

Did working with a third party via e-mail and telephone save you physical time?

I think it saves some time when questions arise about the intent of a particular item in the spec. If the spec writer has a good understanding of fire apparatus, I don't have to spend a lot of time trying to explain an issue to the APC. The spec writer has to do that. The concern that we have on our end is we have no idea if the spec writer is using due diligence. In this particular case, I knew the spec writer and I knew he had an extensive background in fire apparatus, so that made it easier. That is not always the case.

Was it beneficial to