Saying goodbye is difficult! Starting a new chapter in your life is exciting!

I will be saying goodbye to all of you as the Executive Director of the Washington Fire Chiefs on December 31, 2013. It was 9 years ago that I started this adventure to help your elected officers Serve, Educate and Lead this great association. I am also excited to pass the responsibility to Chief Wayne Senter who will begin on January 1, 2014 for a seamless transition. The WFC deserves your support and participation and when we are united the fire service is an incredible force. Do not miss an opportunity to be part of building the future of the fire service. The most difficult goodbye will be to Kathleen and Lori who bring joy to me on a daily basis. They love you and the WFC and work tirelessly to ensure goals are achieved. They are the best and they aren't going anywhere!

The WFC would like to update you on the situation with Chief Dave Lafave.  Join the WFC and keep him in your prayers as we hope for his speedy recovery.

Subject: Update Chief LaFave 12/9/13

Chief had a good day. He walked 11 laps around the unit which was 1 lap over the goal the doctors set. He talks a lot about the good conversations he has had with the folks he normally would not have had the opportunity to have long conversations with, he is very grateful to everyone for their concerns and various forms of assistance. Still shooting for release on Wednesday as long as everything keeps moving in the right direction.

Feel free to shoot him an email, he is probably up to getting a few now that things have calmed down an bit.

AMKUS Rescue Systems Mini Simo GH2B-MCH with BOOST offers two-tool simultaneous operation with "BOOST" mode. When in alternate operation, "BOOST" mode will increase tool speed in both pump stages. Weighing in at approximately 58 pounds, the compact unit offers a carrying handle and is very portable. In addition, the modular design reduces the time required for service.
-www.amkus.com. 800-592-6587

HAIX's Airpower® XR1 was developed with the wildland firefighter in mind. The Airpower® XR1 can take personnel to the fireline and back while offering the comfort you need to keep you on your feet all day in the station. The newly developed cushioned insole offers comfort, especially when combined with the HAIX® built-in arch support system. The Airpower® XR1 offers waterproof/chemical protection with the CROSSTECH® inner liner, composite toe protection, and nonmetallic puncture protection. Compliant with NFPA 1977 and NFPA 1999.
-www.haix.com. 866-344-4249

Gorman-Rupp fire pumps are engineered to deliver dependable performance without interruption. From portable to larger tanker pumps, all are designed for little or no maintenance. Tanker pumps are suitable for water transfer, drafting, and fighting brush fires. These pumps are self-priming and easy to mount and feature aluminum or cast iron construction with enclosed impellers. Pumps are available in clockwise or counterclockwise rotation and come standard with a mechanical self-lubricating seal.
-www.GRpumps.com, 419-755-1011

Paratech's HYDRAFUSION STRUT is available in three types: HFS 16 (lifts 16 inches), HFS 10 (lifts 10 inches), and HFS 04 (lifts four inches). All lift 10 tons with a 2:1 safety factor. All shore 20,000 pounds with a 4:1 safety factor. They feature the patent-pending Dual Shaft End Adapter for use with Paratech AcmeThread or LongShore RescueStruts as well as no-spill, flat-face hydraulic couplings with a nonconductive 10-inch kink-resistant hose. Two speed, single acting, lightweight, 10,000 psi, metal hydraulic pump.
-www.paratech.com/hfs3, 815-469-3911

Streamlight® Vantage® bright red helmet-mounted tactical light is powered by C4® LED technology for extreme brightness. Both the new red and the existing black Vantage also now feature an improved light output of 115 lumens and 7,000 candela peak beam intensity, and an increased beam distance of 167 meters. The helmet light also features an ultra-bright blue safety tail light that enables firefighters and rescue workers to be seen in smoke-filled rooms, blackout conditions and other emergency situations regardless of which direction the light is shining. The red Vantage uses two 3-volt CR123A lithium batteries and delivers six hours of continuous run time. Streaml

By Raul A. Angulo

I can already hear Seattle (WA) Fire Department Captain Steve Bernocco saying, "Oh no! Not another article on door chocks!" Yes, another article on door chocks! I did have to ask myself why there is always a new tool coming out to wedge a door. The answer is because it is still a problem. Standard wooden wedges are cut in a variety of widths and lengths. Inevitably one is too short, too thin, or too fat. Because the wood breaks down and finally cracks, companies started making hard rubber wedges. They're good for wedging sprinkler heads but they're not very good for door wedges. Heavy commercial doors can still compress them. I find I often have to double up on rubber wedges to get the door opened to where I need it. Even then, they slip. I started using the "Jerome" clamp (Tool Tech, May 2012), which is an inexpensive, heavy duty, plastic hand-gripped clamp, but the door still has some play in it. On all residential and most commercial doors you'll run into, it works great. It is lightweight and doesn't slip, but the spring can still break with heavy tensioned, self-closing doors.

(1) The Fat Ivan is a door chock design invented by a Cincinnati firefighter. It expands on the concept of the angle iron and hook used to chock a door open. The plastic panels are made from nylon-impregnated engineered plastic, making it extremely strong and durable. It is 100 percent resistant to corrosion and won't rust in your pocket. (Photos by author unless otherwise noted.)

Leave it to firefighters to come up with a new design. A firefighter ingeniously figured out that if a hook was welded on to the spine of a piece of angle iron, you can simply drop the hook over a hinge on the inside jamb of the door and it will securely hold the door open. I have seen a few of them around. The problem with these self-made contraptions is that the angle iron is no more than 90 degrees, which, depending on the door, only holds it open about ½ to ¾ of the way (approximately 45 to 60 degrees). The homemade versions can be heavy to carry in your pocket, and unless the edges are smoothed out, they will definitely rub a hole in your bunker coat pocket over time. If the edges don't make a hole, the hook will. This can be an expensive and inconvenient repair, not to mention that you could also lose some valuable pocket tools. It will also rust after repeated exposure to moisture. The real downside is when you accidentally fall and land on the angle iron while it is in your pocket. It is not collapsible and has hard, defined edges. In other words, because it's bulky, it's going to hurt. Other than that, it is a great tool.

(2) In the closed position, the hook is protected from accidentally poking the firefighter. The hook is a case-hardened, zinc-plated steel rod. The panels butterfly open to 130 degrees, which is better than a 90-degree angle iron and hook. The 130-degree design will securely hold the door open at 80 degrees or in the fully opened position without slipping.

A New Solution

Lieutenant Nick Caliguri, a 22-year veteran of the Cincinnati (OH) Fire Department assigned to Truck 32, was a fan of the angle iron door chock but after a few bunker coat pocket repairs and falling hard on his metal door chock, he thought there had to be a better way to design it.

He invented the Fat Ivan. By expanding on the hook and angle iron design and eliminating the problems, he made a good tool into an excellent

Alan M. Petrillo

The California Governor's Office of Emergency Services (Cal OES) manages a statewide fire and rescue program, providing Type 1 pumpers built by HME Inc. on loan to local fire departments for use in their districts, while requiring those departments to staff the vehicles for the state when needed.

Cal OES purchases the vehicles fully equipped, then assigns the pumpers to local governments and fire agencies on temporary-use agreements where the state never relinquishes control of the vehicles. "We continue to maintain the vehicles and twice a year do an onsite inspection of the pumpers to be sure they are maintained according to our standards," says Kim Zagaris, state fire chief for Cal OES. "The agencies agree to staff the vehicles anywhere and anytime that we need them, whether in state or across the nation. We provide reimbursement for their staff members, but there's a clause in the agreement that says they may have to staff the pumper for free."

Mitch Willoughby, national sales and marketing director for HME, says his company recently was awarded a second multiyear contract to supply Cal OES with Type 1 Model 18 pumpers. "Our first contract was for five years, and we produced 269 apparatus," Willoughby says. "We built 49 Type 1 pumpers for Cal OES, 164 Type 3 wildland pumpers for CAL FIRE, and 56 other products through a cooperative purchasing program with the state." Willoughby estimates that about 95 percent of the Cal OES fleet of vehicles was built by HME.

(1) Cal OES has a temporary-use agreement with the Sacramento (CA) Fire Department, where Sacramento uses and staffs this HME Model 18 Type 1 pumper. Cal OES has 114 of these pumpers in its fleet. (Photos courtesy of the Sacramento Fire Department.)

System Cornerstone

Zagaris says the program has been around since 1950, when it was run under the federal Civil Defense Program. "Back then, we purchased 100 pumpers and matched that value with state money," he points out. "We are the only state in the country still running this program-it is the cornerstone of California's fire and rescue system."

Besides managing the state fire and rescue program, Cal OES also provides urban search and rescue (USAR) resources for local and federal partners, has Type 1 swift water rescue teams, manages a fleet of water tenders (tankers), oversees the fire school program for cities in the state, and serves as the homeland security agency for California's 38 million people. Between 2008 and this year, the agency was known as the California Emergency Services Agency (Cal EMA) but has since reverted back to its original name.

(2) The Sacramento (CA) Fire Department HME pumper is on a short front overhang (SFO) four-door cab and chassis and carries a Hale 1,250-gpm pump, an 850-gallon United Plastic Fabricating water tank, and a 20-gallon foam tank.

The Fleet

Zagaris points out that Cal OES currently has a large fleet spread out around the state. "We have 114 Type 1 pumpers, 15 Type 3 wildland pumpers, 12 Type 1 water tenders, 13 swift water vehicles, 18 rescue system vehicles, six communications units, and a variety of command and other vehicles," he says. "Our Type 1 pumpers built by HME ar