The Ready Rack extractor can wash one to two sets of turnout gear per load. Full wash cycle is 25 to 35 minutes. The unit comes with a manufacturer’s warranty on parts. The Ready Rack extractor is designed to be serviced by the end user. Total front access and simple design allows the user to maintain and service the machine without having to pay large repair bills. Ready Rack offers guidance on do-it-yourself maintenance and repair. All replacement parts are shipped factory direct by UPS to the end user.
Temperature controls affect the temperature of wash water only. The extractor is designed to use cold water for rinses. Hot temperature can not exceed 105° F per NFPA requirements.
Water usage controls regulate the amount of water entering the extractor during each fill. Use the high setting for all normal loads containing a fully or loosely packed tub. Use the low setting for loads containing only a few garments.
Wash cycle controls regulate tumbling speed, tumbling duty cycle and spin speed. Use the normal setting for most fabrics; it has the fastest spin speed (560 RPM/97.8 G-Force). Delicate settings has a slower spin speed (525 RPM/85.9 G-Force). Use the delicate setting for delicate and knitted items.
The extractor runs on 120 volts (watts per load: 110-160 watt hours). Do not plug power supply cord into GFI outlet. This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The power cord is at the bottom center of the black panel and is 12’ long .
The Ready Rack Extractor is manufactured with a patented stainless steel inner and outer tub as opposed to plastic or porcelain. Extractor also has reversible, variable-speed motor which eliminates the need for a transmission.
For more information, visit www.readyrack.com.