Chris Mc Loone

We’ve been reading a lot about rescue trucks during the past few months.

Bill Adams has taken us through the specification process and discussed the myriad options to consider when purchasing one. This month, Adams and Ricky Riley talk about the pros and cons of walk-in or walk-around rescue in our “FA Viewpoints” department, and Peter Ong’s cover story profiles a unique rescue rig from the San Diego (CA) Fire Department. Tired of rescue trucks yet?

During the past few months, we’ve also talked about embracing our future fire service leaders as well as the fire trucks of the future. Taking delivery of a new rescue truck at my fire company in the past year and watching our future leaders get all of our trucks ready leading up to the Independence Day holiday have afforded me the opportunity to reflect on both.

First, regarding the truck, the truck committee had its hands full in the beginning planning stages for the new truck. There are size restrictions in the firehouse, both height and length, so the new truck couldn’t be any taller and not much longer than the one it was replacing. But one debate was whether to go with a walk-in or walk-around. The truck committee ended up going with a walk-in but acknowledged a need for storage by shortening the walk-in area. So, after hearing about how the committee went back and forth before coming to a consensus, it was interesting to read Adams’s and Riley’s opinions on walk-in and walk-around rescues.

It’s also amazing how things have changed since 2002. We read in these pages every month about new technologies and innovations, but sometimes it’s hard to realize how far we’ve come until you see two trucks side by side. Equipment mounting advances are obvious on the new rig. And, all the compartments have LineX applied.

There are also some things you don’t see. For example, LED lighting on this truck means the new one has a smaller generator. All roll-up doors and LED strip compartment lighting mean no more lights in the doors and along compartment walls with bezels that can get pretty banged up over time.

One noticeable difference is the lack of “belly boxes” on the new truck. We just never had any luck with them. That is not to say that other fire companies wouldn’t find tremendous value in them, but they just didn’t work for us. All in all, our truck committee did a good job building the right rescue truck for Weldon Fire Company.

Moving to the future leaders and younger firefighters, this month, I’ll have 24 years in the company. Just recently at Fourth of July prep, a fellow member who joined in 1993 and I were discussing parade prep back then. We talked about spray painting the wheel wells and rolling around underneath the trucks with a pressure washer. I will say this: Thank goodness for newer floor coverings. Our 1989 Saulsbury rescue was a walk-through, and there was a lot of diamond plate for the rookie to polish.

Sometimes it’s beneficial to just step back and sort of take in everything that is going on, remembering that you were once the rookie or young firefighter, working hard on the trucks, learning just how much it takes to get them ready, and the energy you brought to the process. As we’ve been preparing the trucks, especially the new rescue, it’s been a pleasure to watch our younger firefighters - a few of whom were invited to participate in the truck committee for the new rescue - working hard, taking pride in the appearance of the rigs, and ge

Chris Mc Loone

We’ve been reading a lot about rescue trucks during the past few months.

Bill Adams has taken us through the specification process and discussed the myriad options to consider when purchasing one. This month, Adams and Ricky Riley talk about the pros and cons of walk-in or walk-around rescue in our “FA Viewpoints” department, and Peter Ong’s cover story profiles a unique rescue rig from the San Diego (CA) Fire Department. Tired of rescue trucks yet?

During the past few months, we’ve also talked about embracing our future fire service leaders as well as the fire trucks of the future. Taking delivery of a new rescue truck at my fire company in the past year and watching our future leaders get all of our trucks ready leading up to the Independence Day holiday have afforded me the opportunity to reflect on both.

First, regarding the truck, the truck committee had its hands full in the beginning planning stages for the new truck. There are size restrictions in the firehouse, both height and length, so the new truck couldn’t be any taller and not much longer than the one it was replacing. But one debate was whether to go with a walk-in or walk-around. The truck committee ended up going with a walk-in but acknowledged a need for storage by shortening the walk-in area. So, after hearing about how the committee went back and forth before coming to a consensus, it was interesting to read Adams’s and Riley’s opinions on walk-in and walk-around rescues.

It’s also amazing how things have changed since 2002. We read in these pages every month about new technologies and innovations, but sometimes it’s hard to realize how far we’ve come until you see two trucks side by side. Equipment mounting advances are obvious on the new rig. And, all the compartments have LineX applied.

There are also some things you don’t see. For example, LED lighting on this truck means the new one has a smaller generator. All roll-up doors and LED strip compartment lighting mean no more lights in the doors and along compartment walls with bezels that can get pretty banged up over time.

One noticeable difference is the lack of “belly boxes” on the new truck. We just never had any luck with them. That is not to say that other fire companies wouldn’t find tremendous value in them, but they just didn’t work for us. All in all, our truck committee did a good job building the right rescue truck for Weldon Fire Company.

Moving to the future leaders and younger firefighters, this month, I’ll have 24 years in the company. Just recently at Fourth of July prep, a fellow member who joined in 1993 and I were discussing parade prep back then. We talked about spray painting the wheel wells and rolling around underneath the trucks with a pressure washer. I will say this: Thank goodness for newer floor coverings. Our 1989 Saulsbury rescue was a walk-through, and there was a lot of diamond plate for the rookie to polish.

Sometimes it’s beneficial to just step back and sort of take in everything that is going on, remembering that you were once the rookie or young firefighter, working hard on the trucks, learning just how much it takes to get them ready, and the energy you brought to the process. As we’ve been preparing the trucks, especially the new rescue, it’s been a pleasure to watch our younger firefighters - a few of whom were invited to participate in the truck committee for the new rescue - working hard, taking pride in the appearance of the rigs, and ge

By Alan M. Petrillo

The incidence of cancer in firefighters has been linked to some of the toxins that collect on firefighters’ turnout gear and self-contained breathing apparatus (SCBA) after fighting fires.

Many departments have turned to using decon rooms and turnout storage rooms at the station where turnout gear can be placed prior to decontamination and stored afterward.

1 Stewart Cooper Newell Architects designed this decon room for turnout gear and equipment. (Photos 1-4 courtesy of Stewart Cooper Newell Architects.)

Hot, Warm, and Cold Zones

Ken Newell, principal at Stewart Cooper Newell Architects, notes that statistics show firefighter incidences of cancer at between 20 and 100 percent higher than the average United States citizen. “The chemicals they are exposed to on the fireground - arsenic, hydrocarbons, benzene, and other carcinogens - collect on their turnout gear and equipment,” Newell says. “That gear and equipment is brought back to the station, which is a significant enough impact to affect the design of stations.”

Newell’s station designs identify the source of contamination and deal with it by designing a hot zone where contamination is the worst, such as apparatus bays, decontamination rooms, and tool rooms; a cold zone, which is the living space where firefighters want to keep the contamination out; and a transition or warm zone in the middle. “We’ve gotten away from designs with the apparatus bays in the middle of the building with day spaces on one side and night spaces on the other because it’s difficult to control contamination,” he says. “Now we put the hot zone on one end of the station and the cold zone at the other end.”

2 Decon toilet rooms like this one designed by Stewart Cooper Newell Architects are places where firefighters can strip, decon shower, and leave contaminated clothing.

Newell recommends having a decon room off the apparatus bays with extractors, dryers, and cleaning areas. “Firefighters can enter, strip, clean, and then store their personal protective equipment (PPE) in another room to off-gas properly,” Newell says. “Both the decon and PPE storage room should have their own separate heating, ventilating, and air conditioning and exhaust systems.”

Because a firefighter’s hair and skin might have been contaminated, Newell also recommends a decon/dirty toilet room near the decon room where firefighters can strip, decon shower, and leave their contaminated clothing. “We also like to have positive pressure on the living side of the station and negative pressure in the hot zone and transition area, which makes it difficult to have air flow into the cold zone,” Newell observes. “The connection of the warm zone then serves as an airlock corridor, from 12 to 20 feet wide, that helps capture contaminants.”

Read more 338 0 Article rating: No rating Posted: Aug 3, 2017 Turnout Gear Decon Spaces in Fire Stations By Alan M. Petrillo The incidence of cancer in firefighters has been linked to some of the toxins that collect on firefighters’ turnout gear and self-contained breathing apparatus (SCBA) after fighting fires. Many departments have turned to using decon rooms and turnout storage rooms at the station where turnout gear can be placed prior to decontamination and stored afterward. 1 Stewart Cooper Newell Architects designed this decon room for turnout gear and equipment. (Photos 1-4 courtesy of Stewart Cooper Newell Architects.) Hot, Warm, and Cold Zones Ken Newell, principal at Stewart Cooper Newell Architects, notes that statistics show firefighter incidences of cancer at between 20 and 100 percent higher than the average United States citizen. “The chemicals they are exposed to on the fireground - arsenic, hydrocarbons, benzene, and other carcinogens - collect on their turnout gear and equipment,” Newell says. “That gear and equipment is brought back to the station, which is a significant enough impact to affect the design of stations.” Newell’s station designs identify the source of contamination and deal with it by designing a hot zone where contamination is the worst, such as apparatus bays, decontamination rooms, and tool rooms; a cold zone, which is the living space where firefighters want to keep the contamination out; and a transition or warm zone in the middle. “We’ve gotten away from designs with the apparatus bays in the middle of the building with day spaces on one side and night spaces on the other because it’s difficult to control contamination,” he says. “Now we put the hot zone on one end of the station and the cold zone at the other end.” 2 Decon toilet rooms like this one designed by Stewart Cooper Newell Architects are places where firefighters can strip, decon shower, and leave contaminated clothing. Newell recommends having a decon room off the apparatus bays with extractors, dryers, and cleaning areas. “Firefighters can enter, strip, clean, and then store their personal protective equipment (PPE) in another room to off-gas properly,” Newell says. “Both the decon and PPE storage room should have their own separate heating, ventilating, and air conditioning and exhaust systems.” Because a firefighter’s hair and skin might have been contaminated, Newell also recommends a decon/dirty toilet room near the decon room where firefighters can strip, decon shower, and leave their contaminated clothing. “We also like to have positive pressure on the living side of the station and negative pressure in the hot zone and transition area, which makes it difficult to have air flow into the cold zone,” Newell observes. “The connection of the warm zone then serves as an airlock corridor, from 12 to 20 feet wide, that helps capture contaminants.” Read more 314 0 Article rating: No rating Posted: Aug 3, 2017 Turnout Gear Decon Spaces in Fire Stations By Alan M. Petrillo The incidence of cancer in firefighters has been linked to some of the toxins that collect on firefighters’ turnout gear and self-contained breathing apparatus (SCBA) after fighting fires. Many departments have turned to using decon rooms and turnout storage rooms at the station where turnout gear can be placed prior to decontamination and stored afterward. 1 Stewart Cooper Newell Architects designed this decon room for turnout gear and equipment. (Photos 1-4 courtesy of Stewart Cooper Newell Architects.) Hot, Warm, and Cold Zones Ken Newell, principal at Stewart Cooper Newell Architects, notes that statistics show firefighter incidences of cancer at between 20 and 100 percent higher than the average United States citizen. “The chemicals they are exposed to on the fireground - arsenic, hydrocarbons, benzene, and other carcinogens - collect on their turnout gear and equipment,” Newell says. “That gear and equipment is brought back to the station, which is a significant enough impact to affect the design of stations.” Newell’s station designs identify the source of contamination and deal with it by designing a hot zone where contamination is the worst, such as apparatus bays, decontamination rooms, and tool rooms; a cold zone, which is the living space where firefighters want to keep the contamination out; and a transition or warm zone in the middle. “We’ve gotten away from designs with the apparatus bays in the middle of the building with day spaces on one side and night spaces on the other because it’s difficult to control contamination,” he says. “Now we put the hot zone on one end of the station and the cold zone at the other end.” 2 Decon toilet rooms like this one designed by Stewart Cooper Newell Architects are places where firefighters can strip, decon shower, and leave contaminated clothing. Newell recommends having a decon room off the apparatus bays with extractors, dryers, and cleaning areas. “Firefighters can enter, strip, clean, and then store their personal protective equipment (PPE) in another room to off-gas properly,” Newell says. “Both the decon and PPE storage room should have their own separate heating, ventilating, and air conditioning and exhaust systems.” Because a firefighter’s hair and skin might have been contaminated, Newell also recommends a decon/dirty toilet room near the decon room where firefighters can strip, decon shower, and leave their contaminated clothing. “We also like to have positive pressure on the living side of the station and negative pressure in the hot zone and transition area, which makes it difficult to have air flow into the cold zone,” Newell observes. “The connection of the warm zone then serves as an airlock corridor, from 12 to 20 feet wide, that helps capture contaminants.” Read more 289 0 Article rating: No rating RSS FirstPrevious5767576857695770577157725773577457755776NextLast Theme picker Filter News Catagories Categories News (193) RSS Expand/Collapse Washington News (11821) RSS Expand/Collapse National News (11479) RSS Expand/Collapse WFC News (109) RSS Expand/Collapse Legislative Announcements (7) RSS Expand/Collapse Flag Lowerings (15) RSS Expand/Collapse Memorial Information (24) RSS Expand/Collapse Sections (6) RSS Expand/Collapse Emergency Medical Services (1) RSS Expand/Collapse Fire Administrative Support (17) RSS Expand/Collapse Fire Mechanics (18703) RSS Expand/Collapse Fire Training Safety & Officers (25) RSS Expand/Collapse Public Fire Educators (4) RSS Expand/Collapse HazMat Committee (0) RSS Expand/Collapse Filter to see National, Washington or WFC News, or filter to the Section News you are looking for! Search News Articles Search Terms Of Use | Privacy Statement - Copyright 2024 by Washington Fire Chiefs Home Members About Us News Calendar Resources Documents Sections County Fire Chiefs FRWC WSAFM