Menu

WFC News

Posted: May 10, 2016

Brecksville (OH) Plans to Renovate Fire Station

The city will start a two-year renovation of its single fire station later this year. The project will cost at least $450,000, and probably more, according to city Service Director Ron Weidig. The city will tackle more critical building repairs, like a roof replacement, this year, but due to budgetary concerns, will have to wait until 2017 to complete the overall renovation.
Last fall, the city hired City Architecture Inc. in Cleveland for $25,600 to identify structural problems with the fire station, which is on Brecksville Road just south of Ohio Route 82, next to City Hall. Meanwhile, the city came up with its own, separate list of needed fire station repairs.

Fire Chief Ed Egut said the fire station was built in 1951 with two bays. Three more bays were added in 1974, and in 1983, the city modified the building to accommodate a full-time staff.

Read more
Posted: May 10, 2016

Wilkesville VFD (OH) Acquiring Fire Equipment

Chief John Wood recently showcased the new equipment at the fire house, purchased thanks to a $49,450 safety grant. Wood shopped around for affordable gear and settled on Dill’s Fire and Safety Equipment in West Virginia.
First, there’s the new wet suits and a set of safety floatation vests in case of a water rescue. The department also received new rope rescue equipment, which would be of particular help in rough terrain and hills.

Included are new air bag and air jack systems, which can stabilize a vehicle and lift it under any entrapment scenarios.

All the firefighters will receive a fresh set of safety vests, complete with knives and helmets. For more traditional fire calls, the department has new nozzles and hoses to utilize.

New flashlights will be placed in each of the fire trucks. Strap lights were purchased to fasten onto helmets that can strobe in red and white flashes, which Wood said will especially help in fighting nighttime brush fires.

Lastly are the new emergency road signs to better help with traffic control.

Wood said he is proud of all these positive additions, though he already has one eye toward extra safety improvements. He is hoping to get one more fire truck with a larger tank capable of holding thousands of gallons of water.

Read more
Posted: May 10, 2016

Report Recommends Coldwater (MI) Replace Fire Equipment

A 56-page report has been put together for the City of Coldwater as well as Coldwater and Girard Townships by Emergency Vehicle Response Fire Protection Services which evaluates the city's fire apparatus.
It also proposes a replacement schedule and City Manager Jeff Budd told the City Council on Monday night there some concerns about three pieces of equipment that go back over two decades.

One of the biggest needs is a new ladder truck. The consultants are recommending that this truck, a grass rig and Engine 3 be replaced.

Budd said the two pieces of equipment that need to be replaced will be done so over a three fiscal year period. He felt this would be the time to do it since interest rates are low.

Read more
Posted: May 10, 2016

Aetna Hose, Hook and Ladder Co. (MD) Celebrates New Fire Apparatus

Aetna Hose, Hook and Ladder Co. celebrated the arrival of its newest fire truck with a traditional housing ceremony last week.
The new truck is known as a "quint," a name derived from its five functions: pump, water tank, fire hose, aerial ladder and ground ladders. It will give Aetna more flexibility when responding to fire calls, Chief Drew Bowerson said.

With both a water pump and a 75-foot aerial ladder, the quint can act as either an engine company or a ladder company, depending on what is needed.

The new truck replaced Squirt 7, an engine topped with an articulating water nozzle. At 24 years old, Squirt 7 had reached the end of its useful lifespan. Aetna purchased the quint for $800,000 from Wisconsin-based Pierce Manufacturing, Inc.

Read more
Posted: May 10, 2016

What’s Happening in the Fire Apparatus Industry?

By Bill Adams

Cautiously observed have been recent movements within the fire apparatus industry by several apparatus manufacturers (OEMs) as well as by a number of their key players. As in most industries, there’s usually no official forewarning. That’s to be expected and understood. There might be an inkling that something is going on. Or there’s leaked information resulting in gossip and rumors by the uninformed. That’s also commonplace, though not condoned or encouraged. Open speculation could possibly derail a potentially successful and profitable business venture. And, it may unnecessarily cost someone his job. Secrecy is necessary in the corporate world of alignments and the introduction of new products. The fire apparatus industry is extremely competitive. Introducing a new concept or a new technology is a major investment. No manufacturer wants to educate a competitor. Unless a patent is held on something new, it may only be a matter of time before it is copied. That’s why manufacturers have employees sign confidentiality clauses. Lateral movement of employees is commonplace whether for personal betterment or industry efficiency. You don’t know—and most won’t tell.

Rank-and-file fire service members are as prone as some industry employees in spreading rumors, speculating, and second guessing what the industry is doing. Sit around any firehouse coffee table. The firefighters are as uninformed as are industry underlings. Tom, who drives the pumper, may have no solid evidence for why one manufacturer would purchase another. Dick, the aerial operator, may not understand market share. The young lieutenant on the ladder company may not know the difference between a merger, a strategic alignment, a formal partnership, and a buy-out. Chief Harry might not understand, or even care, why his contact in his favorite manufacturer’s factory is now working for a manufacturer he would never purchase a rig from. Give firefighters two more cups of coffee and listen. Then send them to a trade show. OEMs’ employees are justifiably concerned with job security. The intent here is not to be critical of or question why manufacturers make corporate moves or why people change employers.

In the last 25 years there has been a variety of mergers and acquisitions within the industry. Whether they were successful or not is debatable. A result of three of those “alignments” was the permanent closing of one chassis manufacturer and three apparatus manufacturers. A major industry shakeup occurred when a chassis manufacturer purchased five apparatus OEMs combining them into one operation. All are gone now. Employees can be justifiably concerned.

There are two sides to every story. An acquisition, partnership, or merger is not necessarily a buy-out or an overthrow. It can also be a buy-in or an investment. One example is when one apparatus OEM partnered with another and eventually partnered with two more. About 15 years after the last partnering, the result is a vibrant organization that’s one of the top five OEMs in the American apparatus industry. 

Recent acquisitions have caused another “disturbance in the force.” However, fire service members shouldn’t get their bunkers in a twist. As long as grandmothers keep having heart attacks, cars crash into each other, automatic alarms go off, and there are real fires, there will be a need for fire trucks. And, more than one company will be around to build them. Some will do a bet

Read more
RSS
First73617362736373647366736873697370Last

Theme picker

Search News Articles