Menu

WFC News

Posted: Apr 1, 2014

Safety: Apparatus Improvement

By Robert Tutterow

In a previous column, I shared a quote from Glen Usdin, a former magazine publisher, that states, "The fire service is a low-tech market that has zero potential for growth, and the amount of new products and services being introduced each year is very small. We keep our expensive stuff for a long time and don't really embrace much new technology." I found this comment to be humbling as it was something I have never considered or heard mentioned.

The quote continued to weigh on my mind, and I started reflecting on fire service product innovations. When I step back to my first experiences in the fire service as a kid in the late 1950s, I can easily see changes everywhere. For example, when my dad became a charter member of a local rural volunteer fire department, there were no pagers and no 911 system. To report a fire, you had to call the local funeral home. It also ran the ambulance service and was available all day. The funeral home would call Mrs. Nina Powell, who lived across the road from the fire station. Fortunately, she was almost always at home and hopefully not on the phone. Yes, there was a backup contact. Mrs. Powell would go to the fire station and activate the alarm mounted on the roof. She would remain outside the station and tell the responding firefighters the location of the fire. This kept firefighters from having to get out of their vehicles. After a few minutes, she would write the information on the chalkboard for any late-arriving firefighters and return home.

The department's engine was a 1958 Howe pumper on a six-cylinder Chevrolet chassis with a four-speed manual transmission and two-speed rear end. The tanker (water tender) was a tractor-drawn military surplus vehicle. The tractor was a 1939 Federal with "armstrong" power steering, and the tanker trailer had a 2,000-gallon capacity. The tractor was as long as the trailer, and this quickly separated the skilled drivers from the not-so-skilled when it came to backing. There were no two-way radios and no incident command system. Yet, all of this was still a huge improvement over the horse-drawn, hand-pumped, and steam-driven engines of yesteryear. Clearly, the fire service has come a long way.

Emphasis on Safety

However, it's only been in the past 25 to 30 years that there has been an emphasis on fire apparatus and equipment as it relates to firefighter safety. Almost all the innovations have come from other industries like the military and, to some degree, the space program. Many of the changes have been driven by laws, standards, and litigation-or the fear of litigation. The fire service simply has little horsepower when it comes to driving technological advances. Historically, most of what we do is low-tech, though this is beginning to change.

For apparatus, the biggest change has been in cab design-going from open cabs to fully enclosed cabs. This became a National Fire Protection Association (NFPA) requirement in 1991. The change was prompted by a lawsuit against an apparatus manufacturer, the Peter Pirsch Company. A Brookline, Massachusetts, firefighter-Joseph Tynan-died from head injuries sustained when he fell from the apparatus during a response. A key point to the prosecution's case was the grab bar that wrapped around the back of the canopy cab. The defense was not able to determine the purpose of the grab bar other than a place to hold onto while standing during a response. The Pirsch Company was found liable for the accident and was successfully sued for $5 million. Soon thereafter, it went out of business.

Visible warning devices for apparatus have also improved with the emergence of LED lights. Electronics are now the norm in engines and transmissions. Yet, these improvements come from other industries. There have been improvements to the seating and restraint systems in fire apparatus as well as improvements in step and grab

Read more
Posted: Apr 1, 2014

LEDs Taking Over Firefighting Apparatus

By Alan M. Petrillo

There's been a quiet revolution in lighting on all types of fire apparatus, and light emitting diodes-better known as LEDs-are leading the charge.

LEDs have many advantages over other types of lighting devices: They draw less current, burn cooler, and last inordinately longer.

Although LED lighting fixtures are more costly up front than other types of lighting, they still are being chosen more frequently to light up fire apparatus, from scene lighting to light towers to warning lights, and interior lighting for compartment illumination.

LED lighting for fire apparatus

Whelen Engineering makes a wide variety of LED lighting for fire
apparatus, including its Pioneer line, such as these standard and
surface mounted models. (Photo courtesy of Whelen
Engineering.)

 

Widespread Acceptance

Andy Olson, vice president of fire, rescue, and EMS for Whelen Engineering Co., says his firm "has experienced a huge acceptance of LED lighting on fire apparatus. It is pretty much accepted across the board so that it has become the norm, a standard in the industry."

Olson says that if there's a type of lighting needed on a vehicle, Whelen makes it. "Emergency warning lights, brake and tail lights, backup lights, flood lights, and scene lights-we make them all," he says. "Ninety percent or more of our products now are LEDs, which we make in a whole range of products, from standard units to top-of-the-line offerings. Halogen-based products have virtually disappeared."

Rota-Beam introduced by Whelen Engineering

The Rota-Beam introduced by Whelen Engineering is a solid
state LED that mimics a rotating beacon. (Photo courtesy of
Whelen Engineering.)

 

Olson notes that last year Whelen introduced the Rota-Beam, a solid state LED that mimics a rotating beacon. The benefits, he points out, are the longevity and brightness of LED lighting and that there are no gears or motors in the light.

Toh Meng, president of FRC, a division of ROM Corp., says his company has seen his LED products used by original equipment manufacturers (OEMs) and dealers for about 80 percent of the vehicles they are building or selling. "Whether it is for scene, interior, compartment, or warning lighting, people love LED technology," Meng says. "They like the color of the light. It's whiter and closer to sunlight than other types of illumination; the quality of the light is better; the LEDs have a much longer life, lasting between 50,000 and 100,000 hours; and they are more reliable and trouble-free, making their cost of ownership less."

Dave Cotsmire, Will-Burt's marketing manager, points out that for the past few years, LEDs have been the majority of the lights Will-Burt has installed on its towers. "LEDs are the buzzword in the fire industry when it comes to lighting," Cotsmire says. "They use less power, don't need an onboard generator, and can plug straight into a 12-volt system. The demand is out there and is growing year by year."

Los Angeles County (CA) firefighters load hose in a pickup truck lit by Code 3 LED Arch beacons

Los Angeles County (CA) firefighters load hose in a pickup truck
lit Read more

Posted: Mar 4, 2014

Letters to the Editor

Reconsider Your Photos

I have a comment regarding the photo by Michael J. Coppola that appears on the cover of the January 2014 issue of Fire Apparatus & Emergency Equipment. I would ask that you and your staff pay closer attention to detail before using a picture like this as a moniker for some apparatus manufacturer. I have always found many of the articles in your publication both educational and useful. I am using this photo as a training session at our department on what not to do at a structure fire!

Both Occupational Safety and Health Administration (OSHA) and, I am sure, state or department rules are violated over, and over, and over. The photo depicts active fire in the center of the picture. There is one firefighter shown on the second-story roof to the left without helmet or gloves on. Really? He appears to be yelling some type of communication to the guy on the ladder. What, they have never heard of radios? The next firefighter is seen on the ground ladder without a helmet, gloves, or structure coat. He must be the hero firefighter since he doesn't believe he has to wear his mandatory OSHA-required gear on the fireground. So when he falls off the ladder or it slides out from underneath him, what do you tell the widow when he dies? And finally, the superhero on the aerial with his designer shades and his bottle of water looks like a nice pose for some friend-no gear whatsoever! They call this professional firefighting? These actions are why every single month the fire service is burying firefighters or reporting another "close call."

I understand this fireground scene had absolutely nothing to do with your magazine or your staff. But please, show some professional responsibility and do not publish photos that are so completely offensive to the men and women of the fire service who do it right every day. This truly is an insult. If you do not have a professional staff level fire officer to review photos such as this prior to publication, I would gladly submit my name.

Dennis D. Fouchia
Chief
Lenox Township (MI) Fire Department

Associate Editor Chris Mc Loone responds: Whenever a nonstaged photo is considered for a cover, there is a possibility that those in the image could be captured in a less than flattering light. With that in mind, the photos we choose focus on the apparatus operating at the scene of a fire. However, the advantage of using such images means that personnel are depicted in real-world environments. We encourage all readers to take cover photos and use them for teaching purposes.

Read more
Posted: Mar 4, 2014

In The News

AMERICAN LaFRANCE unexpectedly closed its doors on January 17, 2014. Shortly after the news spread, the company issued this statement:

"American LaFrance, LLC, the manufacturer of fire, rescue, and vocational vehicles, announced the closing of its warehouse, production, and service facilities in Monks Corner, South Carolina, Ephrata, Pennsylvania, and Los Angeles, California.

"The company is advising its customers that they will be able to continue obtaining replacement parts and service for vehicles manufactured by American LaFrance from a new third party vendor. American LaFrance will contact customers with information about where they can obtain parts and service for their vehicles in the near future.

"Unfortunately, the company's unexpected current financial condition requires the discontinuation of operations in these locations at this time and these facilities are not expected to reopen."


FERRARA FIRE APPARATUS, INC., announced that America's Bravest Equipment Company is its new dealer in Central and Eastern Kentucky. America's Bravest is led by company president Dave Goldsmith. Chris Ferrara, Ferrara Fire Apparatus president and CEO, says, "We've been aggressively growing our dealer network over the past year. In doing so, we are seeking out companies established in the fire service with a good customer base and a first-rate reputation. America's Bravest is a 12-year-old company with a loyal following and a long track record of success with their equipment lines. They also have an excellent sales and service team that is extremely excited about selling fire trucks." Dave Goldsmith, America's Bravest Equipment Company owner, adds, "America's Bravest Equipment Company has the same high standards as Ferrara. Our company is very selective on who works for us, and what products we offer our customers. We took a very hard look at which fire apparatus manufacturer we represented, and Ferrara exceeded our expectations. The sales team at America's Bravest is very excited in being able to offer our customers a quality fire apparatus."


Following its November 2013 Product Safety Alert for firefighter turnout gear, W. L. GORE & ASSOCIATES has worked with fire departments, dealers, and manufacturers throughout North America to assess and reseal, as necessary, the seams of turnouts with Gore moisture barriers. In the first two months since the alert, Gore has successfully remediated both stored and worn gear for metropolitan and volunteer departments that enrolled in the remediation program early. Industry response has been positive to Gore's remediation program, and Gore will continue to collaborate with all responding departments on potentially affected gear. In conjunction with the remediation program, Gore has developed a new GORE-SEAM® tape. This new tape is unaffected by storage interactions, and it eliminates the need for new gear to be stored in open air. Turnout gear manufacturers are working to rapidly incorporate the new tape into their products using Gore moisture barriers.


HARRISON has announced that Tim Allaband has been added to Harrison Hydraulic Solutions as the northeastern region manager. In this position, Allaband will be responsible for the forecasting, marketing, training, and sales of Harrison products into all the business segments that Harrison serves in the northeastern region. He will also be responsible for integrating Harrison Products and Services into new markets outside of the traditional fire and emergency segment. Allaband most recently served as vice president of Redstorm Fire & Rescue Apparatus, in Gainesville, Virginia, where he was responsible for overall sales and service to five states, focusing on both

Read more
Posted: Mar 4, 2014

Apparatus/Equipment News

Motorola Minitor VI two-tone voice pager is small, light, and tough. Its improved receiver is designed for maximum range and intelligibility. It records and manages up to 16 minutes of messages, allowing users to replay, skip, fast forward, rewind, lock, unlock, and delete messages for quick review and prioritization of calls. Call alerts, memo announcements, and vibrate types can be customized by call address so users know immediately who is paging them. Available in an intrinsically safe model for use around flammable gases, aerosols, and particulates, the pager is built to be small and unobtrusive yet tough enough to withstand heat, smoke, grime, water spray, and many other challenges in the field. The Minitor VI comes with a rechargeable battery that will last several days. It also offers an alkaline battery tray so users can change batteries in the field. www.motorolasolutions.com, 847-576-5000


Kussmaul USB Dual Charging port, Model #091-219, affords users two charging ports with a maximum output of three amps. The USB charging port is designed for easy installation and is reverse-polarity-protected. The built-in LED indicates when the device is powered. The Dual Port can be connected to a 12-volt switched ignition or directly to the battery. The unit provides a quick and easy way to recharge electronic devices in a vehicle, including iPads and iPhones, at the same time. www.kussmaul.com, 631-567-0314


Zico QUIC-MOUNT Premixed Can Holder, Model QM-PMH-1, helps prevent cans from rolling, falling, leaking, or puncturing. The heavy-duty steel and aluminum design keeps cylindrical cans up to 32 ounces (3 3⁄8 inches in diameter) secured and organized where firefighters need them most. Suitable for use with various premixes, rapid tool guard, silicone spray, bug spray, WD-40, and more. The bracket mounts to nearly any flat surface and is powder-coated yellow for maximum durability and can protection. Hang the bracket from the compartment wall to save space on the shelf below. www.ziamatic.com, 800-711-FIRE


Hansen International roll-up door offers many features at an affordable price, including double wall extruded anodized aluminum box lath construction; anodized sand blast finish aluminum box lath that retains its color and promotes the adhesion of graphics and decals; interlocking end caps; available adjustable track mounted door ajar switch on mounting plate; one-piece flocked surface on side seals; PVC seal between each mechanical box lath; seven-year warranty; adjustable counterbalance that allows for the operator to lift the door approximately halfway before it is "assisted" by the counterbalance; and ergonomically designed handles that allow gloved hands easy access and operation. www.hansenint.com, 800-850-8070


Panasonic Toughpad FZ-M1 tablet is a rugged seven-inch fanless tablet with a fourth-generation Intel® Core™ i5 processor. Running Windows 8.1 Pro, the Toughpad FZ-M1 c

Read more
RSS
First84228423842484258427842984308431Last

Theme picker

Search News Articles