Sycamore Volunteer Fire and Rescue is now equipped with new hydraulic extrication tools, thanks to a nearly $27,000 grant from Firehouse Subs Public Safety Foundation, go.tiffinohio.net reported.

With more traffic incidents than fires, this new battery-powered equipment will greatly aid the department as it works to protect citizens and those traveling through by quickly and efficiently removing trapped victims after motor vehicle accidents and structural collapses, the report said.

Many state highways run through Sycamore Fire’s jurisdiction, causing an increase in population especially during the day. Prior to this grant, the crew’s extrication equipment involved a heavy, gasoline-powered engine that took two or more people to move. It was hooked up via hoses and pumps that allowed only a 25-to-30 foot range, making it difficult to assist vehicles off the roadway, the report said.

A portion of every purchase made at U.S. Firehouse Subs restaurants is donated to Firehouse Subs Public Safety Foundation to help provide funding for lifesaving equipment grant awards, according to the report. To date, Firehouse Subs Public Safety Foundation has granted over $3.6 million to first responders in Ohio, including more than $439,000 in the Toledo area.

Faced with continuing repairs to the fire department’s 35-year-old ladder truck, New Philadelphia will spend $1.8 million for a new one, TimesReporter.com reported.

The current ladder truck is a 1987 Grumman Aerialcat, according to the report. The truck was rebuilt on a new chassis in 2008-2009 for $595,000.

The City Council suspended its rules and approved the resolution for the new fire truck on its first reading because of time concerns, the report said. New Philadelphia will be purchasing a demonstration model that will be available in five months. If the city doesn’t buy this truck, it will likely have to wait from 24 to 32 months because so many cities across the country are buying fire apparatus right now, as well as supply chain issues, according to the report.

By Bill Adams

Transforming an idea sketched on a bar napkin into an engineering blueprint or drawing of a buildable fire truck is fraught with pitfalls for vendors and purchasers.

One Web site defines drawings as pictures created by making lines on a surface. Another defines a blueprint as a guide for making something. Both are understatements. Unless explicitly defined later, consider them synonymous.

Value

Fire apparatus fabrication is inefficient without blueprints. It is especially so for a customized one-of-a-kind rig or the first-built in a new series. During competitive bidding, having visual representation of each apparatus proposed is instrumental in determining compliance to purchasing specifications. It also assists in comparing and evaluating multiple proposals.

What some purchasers consider an insignificant change to an apparatus design can render its blueprint worthless. As an example, a purchaser looking at a predesigned pumper’s blueprint says, “Increase the 500-gallon tank to 900 gallons but keep everything else the same.” Minor change? The extra water weighs 3,336 pounds, occupying more than 53.47 cubic feet. Where’s it going? Additional tank material and the supporting structure have to be considered. The wheelbase may require lengthening with a frame liner. Larger axles, suspension, wheels, and tires are probably in order. Most likely, the hosebed and body need redesigning. The front-to-rear axle ratio and center of gravity will need recalculating. Scrap the existing blueprint. Start over.

• Apparatus Purchasing archives
• Apparatus Purchasing: Detailed Specifications Are Needed—Sometimes
• Apparatus Purchasing Committee: Needs vs. Wants
• Apparatus Purchasing: Easy or Hard?
• Apparatus Purchasing: Revisiting Purchasing Specifications
• Apparatus Purchasing: Steps and Specs
• Apparatus Purchasing: Read Between the Spec’s Lines

Regardless of whether

KME—Alhambra (CA) Fire Department pumper. KME SSX cab with 10-inch raised roof and chassis; Cummins X12 500-hp engine; Waterous CSU 1,500-gpm pump; 500-gallon polypropylene water tank; AXIS Smart Truck Vehicle Monitoring system; InView 360 HD video system; 3/16-inch aluminum fire body; coffin compartments. Dealer: Brandon Gomez, REV Fire Group, Jurupa Valley, CA.

PREVIOUS PHOTO OF THE DAY >>

MORE FIRE APPARATUS ARTICLES >>