Menu

WFC News

Posted: Apr 3, 2018

Sutphen Custom Pumper-Tanker Delivered to PA Fire Department

special Delivery Alan M. Petrillo

The Maplewood (PA) Fire Department, deep in the heart of Pennsylvania’s Pocono Mountains, had a need for a tanker and a pumper that would combine a short wheelbase and overall length to allow the firefighters to negotiate tight rural roads.

After talking with Sutphen Inc. and Signal 1 Fire Equipment, Maplewood decided on a pumper-tanker that checked all the boxes on its requirements list.

Stan Pratt, apparatus salesperson for Signal 1, says, “Maplewood wanted to put a lot of firefighting potential in a small package. They wanted a quick-functioning and nimble apparatus that could carry a lot of water and function as a front-line attack engine, a pumper-tanker, or a tanker only.”

1 The Maplewood (PA) Fire Department had Sutphen build this pumper-tanker on a tandem rear axle with a short 192-inch wheelbase and 30-foot 10¼-inch overall length. (Photos courtesy of Sutphen Inc.)

1 The Maplewood (PA) Fire Department had Sutphen build this pumper-tanker on a tandem rear axle with a short 192-inch wheelbase and 30-foot 10¼-inch overall length. (Photos courtesy of Sutphen Inc.)

2 The Sutphen pumper-tanker for Maplewood is powered by a Cummins 450-hp ISL9 diesel engine and an Allison EVS 3000 six-speed automatic transmission with a Jacobs compression engine brake.

2 The Sutphen pumper-tanker for Maplewood is powered by a Cummins 450-hp ISL9 diesel engine and an Allison EVS 3000 six-speed automatic transmission with a Jacobs compression engine brake.

Tight Dimensions

Darryl Rhyne, general manager of Sutphen East Corp., says the fact that Maplewood was willing to go with a tandem-rear-axle vehicle meant that Sutphen could put a 2,500-gallon water tank on the rig to satisfy the department’s water carrying requirements but still keep the vehicle short enough that it would be very maneuverable. “The pumper-tanker has a 192-inch wheelbase, an overall length of 30 feet 10¼ inches, and an overall height of 9 feet 8 inches,” Rhyne says. “We were able to put four compartments on the body, under a Zico QUIC-LIFT electric portable tank rack on the left side, and a Zico electric ground ladder rack on the right. But, there was no room for an extended front bumper, so we installed a standard six-inch bumper.”

Dave Corrazzi, Maplewood’s chief, says the department “wanted to get the most bang for our buck. Originally, we were going to buy a traditional tanker like our old one, which was on a Kenworth T600 chassis with tandem rear axle, had a small pump, and

Read more
Posted: Apr 3, 2018

Using TICs in disaster response.

Thermal Imaging Carl Nix
Carl Nix

We are living in an age where technology is constantly evolving, resulting in the latest advancements in engineering, research, communications, and education. This is certainly affecting the way firefighters fight fires. There is no doubt that advances in technology have improved our equipment, turnout gear, fire apparatus, and overall knowledge of firefighting. We are better equipped today to fight fires.

Thermal imaging cameras (TICs) are perhaps one of the most high-tech tools we have in our arsenal for fighting fires, which is why specialized response groups or technical rescue forces use the TIC when responding to emergencies that involve water, confined spaces, trenches, vehicle extrication, tornadoes, floods, and search rescues. Recently, we have seen mudslides, forest fires, and flooding occurring across the United States that have resulted in lives being lost. The fire service is one of the first responders on the scene when these disasters occur. Our willingness to embrace new technologies and stay at the forefront of advances in technology are why our brave firefighters are well prepared to face these disasters when they occur.

When dealing with specialized rescue situations such as natural disasters, firefighters can use TICs very effectively for a range of operations. Technical rescue forces often own a TIC or have access to one and understand the TIC’s powerful technology. There are TICs with technology exclusively for specialized rescues, such as building collapses or long-range surveillance. Some crews use TICs mounted on helicopters for search and rescue. These specialized TICs are well-suited for specific operations but not practical for fire departments that respond to structural fires. For the most part, TICs for the fire service are relatively simple in comparison. Since first responders are typically first on the scene, they most likely will be using a TIC designed for firefighting.

The TICs used for the fire service are typically fixed-focus and relatively short-range tools, designed mostly for interior fire attack; however, these TICs can detect a human body form several hundred feet away or more, depending on the temperature of the surrounding objects and overall environmental conditions. To search a wide area, such as an industrial facility or an expansive open area, a TIC can be invaluable for conducting the search, performing risk assessments, or assisting in prioritizing resources.

When conducting a confined space rescue scenario in a cellar or basement following a natural disaster such as a mudslide, flood, or tornado, the firefighting TIC is a valuable tool. It’s also an extremely beneficial tool to allow crews to easily see their surroundings and navigate in the dark, particularly when scene lighting is unavailable. In these situations, the firefighting TIC can help locate trapped or injured victims and bring them to safety. A TIC can also be used during confined space rescue to delay a structure collapse or secure the scene. When conducting victim searches, firefighters should look for out-of-place heat signatures and limbs and extremities protruding from debris, under tables, or around objects. Firefighting TICs make the search and rescue process faster and more effective, revealing critical det

Read more
Posted: Apr 3, 2018

Using TICs in disaster response.

Thermal Imaging Carl Nix
Carl Nix

We are living in an age where technology is constantly evolving, resulting in the latest advancements in engineering, research, communications, and education. This is certainly affecting the way firefighters fight fires. There is no doubt that advances in technology have improved our equipment, turnout gear, fire apparatus, and overall knowledge of firefighting. We are better equipped today to fight fires.

Thermal imaging cameras (TICs) are perhaps one of the most high-tech tools we have in our arsenal for fighting fires, which is why specialized response groups or technical rescue forces use the TIC when responding to emergencies that involve water, confined spaces, trenches, vehicle extrication, tornadoes, floods, and search rescues. Recently, we have seen mudslides, forest fires, and flooding occurring across the United States that have resulted in lives being lost. The fire service is one of the first responders on the scene when these disasters occur. Our willingness to embrace new technologies and stay at the forefront of advances in technology are why our brave firefighters are well prepared to face these disasters when they occur.

When dealing with specialized rescue situations such as natural disasters, firefighters can use TICs very effectively for a range of operations. Technical rescue forces often own a TIC or have access to one and understand the TIC’s powerful technology. There are TICs with technology exclusively for specialized rescues, such as building collapses or long-range surveillance. Some crews use TICs mounted on helicopters for search and rescue. These specialized TICs are well-suited for specific operations but not practical for fire departments that respond to structural fires. For the most part, TICs for the fire service are relatively simple in comparison. Since first responders are typically first on the scene, they most likely will be using a TIC designed for firefighting.

The TICs used for the fire service are typically fixed-focus and relatively short-range tools, designed mostly for interior fire attack; however, these TICs can detect a human body form several hundred feet away or more, depending on the temperature of the surrounding objects and overall environmental conditions. To search a wide area, such as an industrial facility or an expansive open area, a TIC can be invaluable for conducting the search, performing risk assessments, or assisting in prioritizing resources.

When conducting a confined space rescue scenario in a cellar or basement following a natural disaster such as a mudslide, flood, or tornado, the firefighting TIC is a valuable tool. It’s also an extremely beneficial tool to allow crews to easily see their surroundings and navigate in the dark, particularly when scene lighting is unavailable. In these situations, the firefighting TIC can help locate trapped or injured victims and bring them to safety. A TIC can also be used during confined space rescue to delay a structure collapse or secure the scene. When conducting victim searches, firefighters should look for out-of-place heat signatures and limbs and extremities protruding from debris, under tables, or around objects. Firefighting TICs make the search and rescue process faster and more effective, revealing critical det

Read more
Posted: Apr 3, 2018

Using TICs in disaster response.

Thermal Imaging Carl Nix
Carl Nix

We are living in an age where technology is constantly evolving, resulting in the latest advancements in engineering, research, communications, and education. This is certainly affecting the way firefighters fight fires. There is no doubt that advances in technology have improved our equipment, turnout gear, fire apparatus, and overall knowledge of firefighting. We are better equipped today to fight fires.

Thermal imaging cameras (TICs) are perhaps one of the most high-tech tools we have in our arsenal for fighting fires, which is why specialized response groups or technical rescue forces use the TIC when responding to emergencies that involve water, confined spaces, trenches, vehicle extrication, tornadoes, floods, and search rescues. Recently, we have seen mudslides, forest fires, and flooding occurring across the United States that have resulted in lives being lost. The fire service is one of the first responders on the scene when these disasters occur. Our willingness to embrace new technologies and stay at the forefront of advances in technology are why our brave firefighters are well prepared to face these disasters when they occur.

When dealing with specialized rescue situations such as natural disasters, firefighters can use TICs very effectively for a range of operations. Technical rescue forces often own a TIC or have access to one and understand the TIC’s powerful technology. There are TICs with technology exclusively for specialized rescues, such as building collapses or long-range surveillance. Some crews use TICs mounted on helicopters for search and rescue. These specialized TICs are well-suited for specific operations but not practical for fire departments that respond to structural fires. For the most part, TICs for the fire service are relatively simple in comparison. Since first responders are typically first on the scene, they most likely will be using a TIC designed for firefighting.

The TICs used for the fire service are typically fixed-focus and relatively short-range tools, designed mostly for interior fire attack; however, these TICs can detect a human body form several hundred feet away or more, depending on the temperature of the surrounding objects and overall environmental conditions. To search a wide area, such as an industrial facility or an expansive open area, a TIC can be invaluable for conducting the search, performing risk assessments, or assisting in prioritizing resources.

When conducting a confined space rescue scenario in a cellar or basement following a natural disaster such as a mudslide, flood, or tornado, the firefighting TIC is a valuable tool. It’s also an extremely beneficial tool to allow crews to easily see their surroundings and navigate in the dark, particularly when scene lighting is unavailable. In these situations, the firefighting TIC can help locate trapped or injured victims and bring them to safety. A TIC can also be used during confined space rescue to delay a structure collapse or secure the scene. When conducting victim searches, firefighters should look for out-of-place heat signatures and limbs and extremities protruding from debris, under tables, or around objects. Firefighting TICs make the search and rescue process faster and more effective, revealing critical det

Read more
Posted: Apr 3, 2018

Do Thermal Imagers Help or Hinder Firefighters?

Thermal imaging camera (TIC) use in the fire service is becoming more widespread and more commonplace than ever before.

With the overall reduction in cost and different manufacturers competing for a small market share, the fire service has seen tremendous improvements in thermal imaging in the past decade. Or has it?

1 Photo 1 courtesy of Insight Training LLC and Project Kill the Flashover.

1 Photo 1 courtesy of Insight Training LLC and Project Kill the Flashover.

In truth, thermal imaging was originally and is still considered military technology. If you don’t believe me, try traveling internationally with a high-resolution TIC without the proper credentials and see what happens when you reach customs. The International Traffic and Arms Regulation (ITAR) and Export Administration Regulations (EAR) are two laws that control and affect the manufacturing, sales, and distribution of technology1 and prevent individuals with improper motives from using infrared technology (IR) to harm others. These regulations are why the fire service has an abundance of 9-Hz-processor-speed TICs on the market today. Anything above 30 Hz has to comply with ITAR and EAR, which is problematic for manufacturers. So, it is easier and less expensive to produce a 9-Hz-processor TIC. But, most firefighters are unaware that a 9-Hz TIC is inefficient and problematic for use on the fireground, as it will trail or lag when the user scans with the TIC. As the military and industry continue to improve on their use of TICs, the fire service has received, in many cases, the technological leftovers and has been limited by such regulations. For example, there are many features that are currently being marketed as innovative and new technology for fire service use when they have been in use by the military and industry for more than a decade. However, the purpose of this writing is not to belittle or demean the manufacturers of TICs but to point out what we as the fire service are responsible for.

2 Photo 2 courtesy of Insight Training LLC and Project Kill the Flashover.

2 Photo 2 courtesy of Insight Training LLC and Project Kill the Flashover.

Purchased with No Training

The issue is this: Fire service TICs are being purchased by fire departments as common tools. But in many cases, they are being purchased without the necessary research, education, and training. In my research and travels, I have found the following to be a common thread internationally.

A lack of performance-based testing or needs assessment criteria: These criteria define the best TIC for an organization’s use, which is done through a needs assessment process. A fire department needs a specific criterion to make its final thermal imaging purchasing decision, which should include a testing program that allows it to see h

Read more
RSS
First48324833483448354837483948404841Last

Theme picker

Search News Articles