Yonkers has two new fire trucks in its fleet, representing a $2.2 million investment to replace aging trucks currently in service, westfaironline.com reported.

During a Jan. 31 event, Yonkers Fire Chaplain William Cleary blessed the trucks before they were put into service, one going to Ladder 70 at 2187 Central Park Avenue, and the other going to Squad 11 at Station 11 at 433 Bronxville Road, the report said.

Deputy Fire Commissioner John Folkerts said that planning for the new trucks began three years ago with preparation of the department’s capital budget and specifications for the trucks, according to the report.

Mayor Mike Spano pointed out that there was bipartisan support for allocating funds to buy the new trucks. He said that the city has put 17 new fire trucks into service in the past 10 years, the report said.

The Martin County Sherriff’s Office arrested a Philadelphia man Sunday and charged him with rampaging through a firehouse after the Philadelphia Eagles lost in the Super Bowl.

They say 25-year old Edward Dalasandro broke into the Martin County Fire Rescue Station on NE Ocean Boulevard at about 10 p.m.

Inside, he ransacked the bunk rooms, urinated on the carpet and stole $126, a uniform hat and some knives, the sheriff reported. When firefighters confronted him, he allegedly threw a meat cleaver at them.

He is charged with armed burglary, aggravated assault on a firefighter and theft.

The Beauregard Volunteer Fire Department was dispatched to its own station after a car crashed into the building, wsfa.com reported.

On Sunday, BVFD was dispatched to Station No. 4 on Highway 51 in Marvyn, one of its stations, for a report of a single-vehicle accident where the vehicle had struck the building, the report said.

Firefighters arrived on scene a short time later to find a vehicle had struck the station causing significant damage to the vehicle, fire station, and apparatus inside, according to the report.

Firefighters had to extricate the driver from the vehicle and then assist EMS with medical care while on scene, the report said.

Due to the amount of damage caused to the station and apparatus, BVFD Station No. 4 has been temporarily placed out of service, the report said. The accident still remains under investigation.

Thermal Imaging Manfred Kihn

When you look at how the fire service has progressed over the years, significant changes in policies, recommendations, and National Fire Protection Association (NFPA) standards have taken place for the betterment of the service.

My first self-contained breathing apparatus (SCBA) consisted of a steel tank, the most cumbersome regulator that you can imagine, and a face mask that made you feel like a scuba diver. We won’t mention how much it all weighed!

Just imagine the old black and white TV set that had all those knobs and dials for fine tuning and the rabbit ears on top for channels and picture reception. Now go your local electronics store and see what is in stock for the latest and greatest high-definition smart TVs. You will be amazed by today’s technology, improvements, and competitive pricing. The same can be said of the drastic changes and improvements in the world of thermal imagers (TIs).

• Thermal Imaging Archives

For most equipment the fire service uses, there are guidelines for replacement, such as the following:

• Personal protective equipment (PPE)—10 years.
• Fire apparatus, depending on the type of department (i.e., frontline, engine, ladder, rescue)—eight to 25 years.
• SCBA—10 years.
• Fire hose—good until it fails the annual testing, or some departments operate on a six- to 10-year equipment replacement cycle.

However, TIs have no time frame. So, when do you replace them?

NFPA REQUIREMENTS

The current NFPA 1801, Standard on Thermal Imagers for the Fire Service—2021 edition, does not stipulate a replacement time or that a fire department purchase a certified TI. However, it does list the following key requirements:

6.1.2 All thermal imagers shall be capable of continuously operating for a minimum of 120 minutes in TI Basic mode without the power source being changed or recharged.

6.1.5 The thermal imager shall incorporate a sensor engine consisting of an infrared sensor with at least 76,800 imaging pixels.

6.1.7 All thermal imagers shall have a minimum video refresh rate of 25 frames per second in both the detector and the display.

6.6.1 The thermal imager shall have a viewing area that contains operational information for the thermal imager user.

6.6.4.1.4 Where the thermal imager is equipped with temperature measurement, the viewing area shall include a numeric temperature indicator, a temperature bar, or both.

6.6.4.2.2 Colorization shall overlay the grayscale thermal images produced by the thermal imager. Details within the thermal image and within the colorization area shall remain resolvable by the user other than at saturation.

6.6.4.2.3 The colors yellow, orange, and red shall have a corresponding, temperature-dependent change in hue as temperatures increase.

6.6.4.6.1 All thermal imagers equipped with a low sensitivity mode shall have a low sensitivity mode indicator.