
By Michael N. Ciampo
The Montgomery Volunteer Fire Company 1 is located in Belle Mead, New Jersey, a hamlet of Montgomery Township, in Somerset County. The department was founded in 1939 and originally operated out of the Belle Mead Garage. The area long ago was inhabited by the Leni Lenape Indians and then became rural farmland when English and Dutch settlers began migrating to the area in the late 1700s after the Revolutionary War. Today the area is mostly residential with older homes and newer lightweight construction homes, condominiums, and townhomes along with industrial and commercial sections gracing its landscape.
The department is known as Station 45 and covers 32 square miles out of its modern drive-through four-bay firehouse. The firehouse is currently the company’s third location, with many modern amenities such as a training room, company officer offices, and fitness and locker room. It sits just off State Highway Route 206 on Griggstown Road. The town is covered by two stations that run as separate departments but run numerous calls and train together often. The department’s original rig was a 1930 Childs pumper purchased for $300 from the New Egypt (NJ) Fire Department, a far cry from today’s modern apparatus at Station 45. Today Station 45’s fleet includes a 2010 Pierce Velocity Rescue Pumper and a 2003 E-ONE Typhoon Pumper—a 1999 E-ONE 105-foot Hurricane Platform (soon to be replaced), a 2007 Pierce Mack 3,000-gallon tanker, a 2005 Ford Brush Fire Unit, 2016 and 2009 Chevrolet Tahoe chief vehicles, a 1984 Military five-ton high-water-rescue vehicle, and an inflatable 12-foot Avon rescue boat with 20-hp engine. The department also maintains a 1966 Maxim engine for parades and community events.
Rescue 45 is a 2015 Pierce Velocity nonwalk-in PUC rescue-pumper. Its paint scheme is a little unusual with its cab partially painted in white (sides only) and the rest of the rig painted red. The entire rig has a white reflective stripe running around the lower portion of the cab and body. The rear of the rig has the safety chevron design. It’s powered by a 500-hp Cummins engine with an Allison 5th Generation transmission and features TAK 4 Suspension. The rig also has a Harrison 15-kW generator and Husky 3 Foam System with 30-gallon tanks of Class A and B Foam. There is also an air cascade system on the rig to fill breathing air cylinders. The rescue body has all roll-up compartment doors which make tool and equipment retrieval much easier. It also has coffin compartments on its upper section with access via the ladder on the rear of the body. The engine has a 1,500-gpm pump, carries 400 gallons of water in its tank, and has 300 feet of 1¾-, 200 feet of 2½-, and 175 feet of 5-inch hose. The department prides itself in making this apparatus work for it at the numerous car accidents that it responds to. With today’s upgrades in the steel—such as boron used in car construction and reinforced areas on a car—the department set the rig up with low- and high-pressure extrication tools. The front bumper extrication compartment allows crews to nose up to an accident and get to work quickly while using the apparatus to block the scene and create a safety margin for their firefighters operating.
On the front bumper, the members created more storage by mounting small hand tools onto the inner section of the compartment’s lid. Here they have quick access to a seat belt cutter, windshie